Hi!
I think there may be enough interest to start a small group buy for Sowter 10K:10K Input transformers. The units I am considering at the moment are the Type 3575 with PCB pins and the PCC wire upgrade. The base price for this is £46.45 per transformer. Given the USD/GBP values at the moment, these are a pretty good deal, in my opinion. The datasheet for Type 3575 is here:
http://www.sowter.co.uk/pdf/3575.pdf
I have talked with Sowter, and the price breaks and discounts are:
12-24 (10%)
25-49 (15%)
50-99 (20%)
100+ (25% maximum discount)
Prices are available on their web shop.
I have an e-mail into them to ask if we can mix and match the PCB mount version and the wire leaded version.
Please reply if this would be of interest!
I think there may be enough interest to start a small group buy for Sowter 10K:10K Input transformers. The units I am considering at the moment are the Type 3575 with PCB pins and the PCC wire upgrade. The base price for this is £46.45 per transformer. Given the USD/GBP values at the moment, these are a pretty good deal, in my opinion. The datasheet for Type 3575 is here:
http://www.sowter.co.uk/pdf/3575.pdf
I have talked with Sowter, and the price breaks and discounts are:
12-24 (10%)
25-49 (15%)
50-99 (20%)
100+ (25% maximum discount)
Prices are available on their web shop.
I have an e-mail into them to ask if we can mix and match the PCB mount version and the wire leaded version.
Please reply if this would be of interest!
yes in fact I have considered them. If there are enough people interested in going that direction, we sure can. The quotes I got from them were only for 1-10 and are as follows:
CMLI-15/15B (wire leads/single shield) $45.02
CMLI-15/15B2 (wire leads/two shields) $49.97
CMLI-15/15BPC (pc pins/single shield) is $47.61
Also, part of the reason for this group buy is that I already have interest from another site and it shouldn't be very hard to hit 25 pieces right out of the gate.
CMLI-15/15B (wire leads/single shield) $45.02
CMLI-15/15B2 (wire leads/two shields) $49.97
CMLI-15/15BPC (pc pins/single shield) is $47.61
Also, part of the reason for this group buy is that I already have interest from another site and it shouldn't be very hard to hit 25 pieces right out of the gate.
Luvdunhill, if you go the Cinemag route, I'd certainly be in for a pair of those. Pretty much dead-on equivalents of the Jensens, and much cheaper.
Praudio said:what is exact use of these transfos ? if many please give details...
http://www.diyaudio.com/forums/showthread.php?s=&threadid=136835
Here's another:
http://syclotron.com/?page_id=8
And if memory serves, AudioXpress had a review a year or two ago of the Jensen box that has two JT11P-1s in it for isolation. Very useful product.
http://syclotron.com/?page_id=8
And if memory serves, AudioXpress had a review a year or two ago of the Jensen box that has two JT11P-1s in it for isolation. Very useful product.
I would like a pair. The Sowter are almost twice the price of the Cinemag so I would prefer the Cinemag, unless the Sowter are better.
Thanks
Jim
Thanks
Jim
SY said:Luvdunhill, if you go the Cinemag route, I'd certainly be in for a pair of those. Pretty much dead-on equivalents of the Jensens, and much cheaper.
alrighty, I'm awaiting pricing 😀
JimT said:I would like a pair. The Sowter are almost twice the price of the Cinemag so I would prefer the Cinemag, unless the Sowter are better.
Thanks
Jim
I haven't seen much quantitative data on the subject, but from what I've read from those who've used them, its the other way around. The Cinemags are likely the better iron. Don't take my word for it though.
I think I might have a pair of those sowters on hand. I'll have to check the number. I got them from Euphonia when it was in biz. If someone wants to do some objective testing, I'll loan one or both of them out.
I'd be interested in the Cinemags if it goes that way. Not in the sowters.
I have a feeling that there could very easily be enough interest to do a group buy for both. If possible, could people state a preference on Sowter / Cinemag and whether they are interested in PCB mount or wire leads?
luvdunhill said:I have a feeling that there could very easily be enough interest to do a group buy for both. If possible, could people state a preference on Sowter / Cinemag and whether they are interested in PCB mount or wire leads?
I would like 2 depending on what happens with Jacks boards.
Anthony
- Status
- Not open for further replies.
- Home
- Group Buys
- GB: Sowter 10K:10K Input Transformer