Salas, Tea-bag, mine has run-in for few weeks now. This is a keeper, thanks again for making the kit available.
Just to share with the guys who are too lazy to go through the hundreds of discussion page (like me initially;-)), C2 is audible, worth spend some moolah here. And don't exceed 15uF!
Just to share with the guys who are too lazy to go through the hundreds of discussion page (like me initially;-)), C2 is audible, worth spend some moolah here. And don't exceed 15uF!
Salas, Tea-bag, mine has run-in for few weeks now. This is a keeper, thanks again for making the kit available.
Just to share with the guys who are too lazy to go through the hundreds of discussion page (like me initially;-)), C2 is audible, worth spend some moolah here. And don't exceed 15uF!
What caps did you test that could fit there? What were the main differences?
Gary
What caps did you test that could fit there? What were the main differences?
Gary
Better SQ.
Better SQ.
Thanks for you input Merlin, but the question was directed at the poster.
Gary
Hi Roger, I used electrolytics initially but now its replaced with Vishay MKP, RS code 684-2251.
Interesting. I used these:
B32794D2106K EPCOS Inc | 495-4135-ND | DigiKey
Which are also MKP series, metallized polypropylene. Have low ESR. Not sure what the difference would be between them. Are these ones that someone tried?
Gary
- Home
- Group Buys
- GB for Salas SSHV2 regulator