The MM won't help you measuring resistance I don't think.
The caps in my stash for 10 and 33pf do not have any labels I marked them with red for 10pf and black for 33pf on the 'tape' that holds them in a spool.
it's possible earlier kits these were marked. Are they little blue caps?
LOL. I am getting old and blind. The bench magnifying glass I could not see the writing. A loupe under natural light I was able to see the writing. you are correct they are labeled as you see. You are good.
Tea
Finally received my kit today which you dispatched on 22 April. Thank you.
I guess I shouldn't be that surprised that it took so long given the difficulties the world is going through with the dreaded virus and consequent transport disruption but I must say I was mighty pleased when the postman handed me the long awaited distinctive purple package.
Let the project commence.
Graeme
Finally received my kit today which you dispatched on 22 April. Thank you.
I guess I shouldn't be that surprised that it took so long given the difficulties the world is going through with the dreaded virus and consequent transport disruption but I must say I was mighty pleased when the postman handed me the long awaited distinctive purple package.
Let the project commence.
Graeme
The 'next' GB of the DCG-3 will use BC327-40 instead of BC560c, as the later is end of life, and there is probably a preference as such. The bc560c quads will be offered as the premium option now, although it may not be the highest performance, merely an option.
I believe the consensus on the sound is that the BC560c is a bit bolder sounding, the BC327-40 more polite. But I am probably given it less comparison time than some others here.
Also, the upa68H transistors are now getting quite rare, and have been sampling my diet of unreliable sources to look for the true thing. I should have some on their way, but they will be a higher cost. So the kit will go up in price a bit accordingly. I will edit these as soon as the rest of the cost of the project is ironed out, product in hand or ordered so I know what parts substitutions may be used. Currently it is only resistors swaps. China tarriffs have hit the cost as well a bit.
I believe the consensus on the sound is that the BC560c is a bit bolder sounding, the BC327-40 more polite. But I am probably given it less comparison time than some others here.
Also, the upa68H transistors are now getting quite rare, and have been sampling my diet of unreliable sources to look for the true thing. I should have some on their way, but they will be a higher cost. So the kit will go up in price a bit accordingly. I will edit these as soon as the rest of the cost of the project is ironed out, product in hand or ordered so I know what parts substitutions may be used. Currently it is only resistors swaps. China tarriffs have hit the cost as well a bit.
You can all edit the spreadsheet now for the next Group Buy, please add yourself in for your needs, and when group buy is close to closing I will reach out for payment. Thanks
The Group buy for salas boards is now open and will close on October 4th 2020 at 9PM ESTI am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ.
Salas Group Buy Comprehensive Information - Google Docs
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ.
Salas Group Buy Comprehensive Information - Google Docs
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
GB Ends in 5 days
GB Ends in 5 days!
The Group buy for salas boards is now open and will close on October 4th 2020 at 9PM EST
I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ.
Salas Group Buy Comprehensive Information - Google Docs
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what you are ordering and have components not ordered to complete project.
GB Ends in 5 days!
The Group buy for salas boards is now open and will close on October 4th 2020 at 9PM EST
I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ.
Salas Group Buy Comprehensive Information - Google Docs
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what you are ordering and have components not ordered to complete project.
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM ESTI am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
I will be sending out private messages as well with instructions as well in the next few days.Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
This is the last week to pre-order boards for the group buy.
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM EST. I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days. Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.
The Group buy for Salas boards is now open and will close on April 11 at 11:59PM EST. I am starting to send out invoices to previous group buy purchasers.
I will be sending out private messages as well with instructions as well in the next few days. Please be sure that your spreadsheet cell meets your requirements, then read the instructions in the group buy FAQ in my signature. Things have changed for all UK buyers and shipping costs have increased and shipping times increased.
Once complete, reply to my private message with required information.
Private message me with any instructions. I assume you know what your ordering and have components not ordered to complete project.