For those who are also in the PRP and Fuku resistors GB, these parts will be shipped with the resistors. As soon as the Fuku's are ready (Greg already responded in the other thread for the time estimate), I will bring the PRP, the Mosfets, and the Keratherm pad over to him to ship. Thanks for the patient.
The PSU is now available in 3 flavours.
CRC, not requiring any of the mosFETs,
Cap Multiplier, requiring the mosFETs,
Regulator requiring the mosFETs, on hold pending further testing/cooling etc.
At the moment the regulator version is on hold while we get the amps up and running and get a chance to compare the CRC to the cap multiplier.
Depending on these user results and finding the correct heatsink, we may add in the regulator version for comparison.
I also have a 4th flavour and there may be others that Users think are worth experimenting with.
CRC, not requiring any of the mosFETs,
Cap Multiplier, requiring the mosFETs,
Regulator requiring the mosFETs, on hold pending further testing/cooling etc.
At the moment the regulator version is on hold while we get the amps up and running and get a chance to compare the CRC to the cap multiplier.
Depending on these user results and finding the correct heatsink, we may add in the regulator version for comparison.
I also have a 4th flavour and there may be others that Users think are worth experimenting with.
The PRP, mosfets, and keratherm pads were handed off to Greg to combine ship.
I think he was waiting for Lee to finish up the 0.47R Fuku matching. Let's see his
update from the Fuku thread.
Thanks,
I think he was waiting for Lee to finish up the 0.47R Fuku matching. Let's see his
update from the Fuku thread.
Thanks,
- Status
- Not open for further replies.