The worst thing that I can think of happening is for both outputs to slide to one rail and stay there. This would mostly depend on the various impedances within the amplifier, any particularly high impedance nodes, like a current source loaded Vas, will be very upredictable without common mode feedback.
A common mode amplifier (and feedback path) can be very simple, just a couple transistors, you'll save a lot of trouble by adding one
A common mode amplifier (and feedback path) can be very simple, just a couple transistors, you'll save a lot of trouble by adding one
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.