For sale I have this super nice 100W Class A amplifier designed by no one else than ZenMod!
I assembled everything and realized my chassis were not big enough for all that glorious Class A and also my room was unfortunately too small for all the heat generated by these mono-blocs.
I have one channel assembled, the other one you just need to solder the output devices which are included. All transistors have been bought matched by ZenMod.
The input stage are assembled, just need to solder the JFets. I also have a second set of input stage almost fully populated. Everything is untested (never been connected to power but should be working perfectly.
Here's a few pictures of the beast in parts!
I'm asking SOLD$USD + shipping for the lot, offers are welcome but no low ballers. Shipping in North America preferably!
I also have two beautiful Audio Supreme encapsulated transformers from Toroidy. These are totally new, unused and bought for this project. I can sell them separately for $USD each plus shipping (they costed me 244Euros each plus shipping + import taxes, so you're getting a good deal). Again offers are welcome but no low ballers.
Here's the specs from Toroidy (I will double check this since I thought they were dual secondary and not quad)
TS 1200VA PRI: 119Vac
SEC : 4 x 17.5Vac (17.14A)
- Epoxy filled in the stainless steel box
- Need long leads (40cm solid wire – where possible)
Thanks
Do
I assembled everything and realized my chassis were not big enough for all that glorious Class A and also my room was unfortunately too small for all the heat generated by these mono-blocs.
I have one channel assembled, the other one you just need to solder the output devices which are included. All transistors have been bought matched by ZenMod.
The input stage are assembled, just need to solder the JFets. I also have a second set of input stage almost fully populated. Everything is untested (never been connected to power but should be working perfectly.
Here's a few pictures of the beast in parts!
I'm asking SOLD$USD + shipping for the lot, offers are welcome but no low ballers. Shipping in North America preferably!
I also have two beautiful Audio Supreme encapsulated transformers from Toroidy. These are totally new, unused and bought for this project. I can sell them separately for $USD each plus shipping (they costed me 244Euros each plus shipping + import taxes, so you're getting a good deal). Again offers are welcome but no low ballers.
Here's the specs from Toroidy (I will double check this since I thought they were dual secondary and not quad)
TS 1200VA PRI: 119Vac
SEC : 4 x 17.5Vac (17.14A)
- Epoxy filled in the stainless steel box
- Need long leads (40cm solid wire – where possible)
Thanks
Do
Last edited:
Just a precision, the Babelfish JX has to be build as mono-blocs since there's two output modules per channel, 20 pairs of Mosfets (10 pairs per side) per chassis.
Do,
What a tremendous undertaking! Looking at ZenMod’s website, this thing is truly big! Unfortunately too big for my setup as well!
GLWS!
Anand.
Babelfish XJ , or JX …….. or whatever – Zen Mod Blog
What a tremendous undertaking! Looking at ZenMod’s website, this thing is truly big! Unfortunately too big for my setup as well!
GLWS!
Anand.
Babelfish XJ , or JX …….. or whatever – Zen Mod Blog