I'm selling these as a kit(not separately)
The audio trafos were pulled from a Panasonic Ramsa mixing console and are thought to be Tamuras. They are 1:1 600ohm and sound SUPERB. Of all the trafos I have tested they're second(not by much) only to the Jensen JT-11P-1. Markings on them are: AMT A 0042 - A4 T10B
The power trafo is an Edcor 10V 2A EI (0930)
All are in good condition. Pics available upon request.
I'm asking $65 including shipping(CAN, US)
Paypal only
The audio trafos were pulled from a Panasonic Ramsa mixing console and are thought to be Tamuras. They are 1:1 600ohm and sound SUPERB. Of all the trafos I have tested they're second(not by much) only to the Jensen JT-11P-1. Markings on them are: AMT A 0042 - A4 T10B
The power trafo is an Edcor 10V 2A EI (0930)
All are in good condition. Pics available upon request.
I'm asking $65 including shipping(CAN, US)
Paypal only
They are 1:1 600ohm and sound SUPERB. Of all the trafos I have tested they're second(not by much) only to the Jensen JT-11P-1.
How do you test a 10K:10K transformer against a 600:600?
How do you test a 10K:10K transformer against a 600:600?
Very easily. I presently have two identical CS4398 DACs. One with the Jensens and one with the Tams. Only the C/R values differ. They both sound great.
Another DIYaudio member(Legarem) has these same trafos and has tested them on a scope. He was quite impressed and stated they were among the very best he had tried.
@ CustomHT In my system they are more musical than the Cinemags. The Cinemags have more weight to them. If you PM me I'll send you pics by email.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.