• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS resistors capacitors diodes transistors

BD232 unmarked NPN 300V .1A TO126 10pc €1

These are said to be BD232, old sand straight from the days of CRT's.


Somewhat akin to a MJE340, anyway 10 for €1
 

Attachments

  • BD232.jpg
    BD232.jpg
    207.9 KB · Views: 219
KD3442/2N3442 NPN 10A 140V 117W TO-3 Tesla clones.

Built like a tank by TESLA, they really made good stuff, I bought these when i wanted to dissipate a lot of power for cheap. I cannot stress enough how good this tesla sand is.



€1 each
 

Attachments

  • 2N3442.jpg
    2N3442.jpg
    188.5 KB · Views: 200
BZT03C12 12V 1W3 zener 25 for €1

These are high quality glass passivated 1W3 12V SOD-57 zeners 5% tolerance if memory serves me right. These are also rated for 300W pulse if memory serves me right again.



straight from the big spool, 25pc for €1 for that price mouser will sell you exactly four units.
 

Attachments

  • BT03-C12.jpg
    BT03-C12.jpg
    322.9 KB · Views: 89
BZT03C24 24V 1W3 zener 25 for €1

My Phone is dead, but these are the same series as the 12V ones, however this box was a sticky mess so i used solvents to clean these.



these are a quarter before taxes each at mouser, I'm letting these go for €1 for 25pc
 
MA7805 MA7812 MA7815 TO3 regulators from Tesla.

I bought a lot of these regulators some time ago, but my love affair with TO3 has come to an end.



letting these go for €1 each, approximately what i paid for them.



beware that some of these have thicker pins than normal TO3 packages.
 
Nixie +180V and +5V regulator boards free

I got four of these left, one boards free if you buy anything from this tread.



They provide the +180V for use with nixies, and +5V 500mA for use with the logic to drive said nixies, All based around the MC34063.


I can supply some of the parts to populate these boards at cost.



See the attached zip for the gerbers if you want to order these yourself.



Cheers!
 

Attachments

Now cleaning out some of my tube supply.

Im getting rid of some of my tubes, so the following USED tubes are available for cheap. These are untested and sold as is, rattling tubes and ones whit white getters are directed to the round archive (trash bin).


Most of them are Philips with some exceptions.



€5 each.

EF86
E83F
E80L



€2 each
PCL86
PF86



€1 each.
EF80/85
PCL82
PCL80
PL500/504


25 cents each.

PCF80
PY88
 
Last edited: