I have the following assembled gainclone boards available. They are assembled, but untested!
6x Digi01 based LM3886 amp boards, each populated with the following specs:
- 1x LM3886TF (insulated)
- 2x 1000uF/50V Nichicon muse power caps
- 1x Dale LVR 0.06 ohm output resistors
- 2x 215k Draloric Resistors
- 1x 20k Vishay RN55 mute resistor
- 1x 1/2 watt 2% Corning Glassware Carbon Comp resistor
Asking $50/pair or $135 for the whole set of 6.
note: These do not include rectifier boards like the BrianGT/Peter Daniel boards.
-------------------------------------------------------
1x Pair of completed BrianGT LM3875 boards, each populated with the following:
1x Red LM3875 PCBs with LM3875TF (isolated)
2x Nichicon Muse KZ 1000uF/50V capacitors
4x 18.7K 0.1% Vishay RNC90Y (S102 equiv) resistors
2x 600R 0.05 % Vishay RNC907 resistors
2x 200R Vishay 447P (I think also S102 equiv) resistors
Includes 2x rectifier boards populated with 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors
Asking: $115 for the completed pair
This is enough to build a pair of monoblock amplifiers.
-------------------------------------------------------
2 pairs of completed BrianGT LM3875 boards, each populated with the following:
4x Red LM3875 PCBs with LM3875TF (isolated)
8x Panasonic FC 2200uF/50V capacitors
8x 22k 1% Caddock MK132 resistors
4x 680R 1% Holco H2 resistors
4x 221R Caddock MK132 Resistors
Includes two rectifier boards, populated 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors, and two unpopulated rectifier boards.
Asking: $175 for the 4 LM3875 boards, 2 populated Rectifier boards, and 2 unpopulated rectifier boards.
This enough to build two stereo amplifiers, or 4 monoblocks of you populate the additional rectifier boards.
-------------------------------------------------------
All of the Vishay resistors are (from my understanding) the mil-spec equiv of the Vishay S102 line. All of the boards (except the unpopulated rectifier boards) are soldered and should be ready to go. I have *NOT* tested these, as the primary reason for selling is I don't have time to finish these projects up.
I will ship via Priority Mail to US Residents only. My guess is that insured shipping would be ~$7.50. I can take payment via Paypal, those wanting to do it via credit card, please add 3%. Please feel free to e-mail me questions or offers at: m i k e at m o TH e r o ne do t com
6x Digi01 based LM3886 amp boards, each populated with the following specs:
- 1x LM3886TF (insulated)
- 2x 1000uF/50V Nichicon muse power caps
- 1x Dale LVR 0.06 ohm output resistors
- 2x 215k Draloric Resistors
- 1x 20k Vishay RN55 mute resistor
- 1x 1/2 watt 2% Corning Glassware Carbon Comp resistor
Asking $50/pair or $135 for the whole set of 6.
note: These do not include rectifier boards like the BrianGT/Peter Daniel boards.
-------------------------------------------------------
1x Pair of completed BrianGT LM3875 boards, each populated with the following:
1x Red LM3875 PCBs with LM3875TF (isolated)
2x Nichicon Muse KZ 1000uF/50V capacitors
4x 18.7K 0.1% Vishay RNC90Y (S102 equiv) resistors
2x 600R 0.05 % Vishay RNC907 resistors
2x 200R Vishay 447P (I think also S102 equiv) resistors
Includes 2x rectifier boards populated with 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors
Asking: $115 for the completed pair
This is enough to build a pair of monoblock amplifiers.
-------------------------------------------------------
2 pairs of completed BrianGT LM3875 boards, each populated with the following:
4x Red LM3875 PCBs with LM3875TF (isolated)
8x Panasonic FC 2200uF/50V capacitors
8x 22k 1% Caddock MK132 resistors
4x 680R 1% Holco H2 resistors
4x 221R Caddock MK132 Resistors
Includes two rectifier boards, populated 16x MUR8100E Diodes and 4x 4.7uF/50V Panasonic FC capacitors, and two unpopulated rectifier boards.
Asking: $175 for the 4 LM3875 boards, 2 populated Rectifier boards, and 2 unpopulated rectifier boards.
This enough to build two stereo amplifiers, or 4 monoblocks of you populate the additional rectifier boards.
-------------------------------------------------------
All of the Vishay resistors are (from my understanding) the mil-spec equiv of the Vishay S102 line. All of the boards (except the unpopulated rectifier boards) are soldered and should be ready to go. I have *NOT* tested these, as the primary reason for selling is I don't have time to finish these projects up.
I will ship via Priority Mail to US Residents only. My guess is that insured shipping would be ~$7.50. I can take payment via Paypal, those wanting to do it via credit card, please add 3%. Please feel free to e-mail me questions or offers at: m i k e at m o TH e r o ne do t com
- Status
- Not open for further replies.