I'm having a bit of a cull of the projects I've enthusiastically collected but, realistically, will never get around to progressing, so a few bits and pieces people might find useful or interesting (or maybe both?).
1. Set of PCBs to build a Hiraga 'La Monstre' 8wpc Class A amp. I bought these from member 'sachu888' here on DIY Audio. Just the bare boards except that I've soldered a set of (genuine, purchased from Spencer) 2SJ74/2SK170 FETs. PSU boards are a cap multiplier. I have a BOM and the PCBs are well labelled. 'La Monstre' schematics etc. are available on the long thread here on DIY Audio. There are some build pictures here (look for member sachu888) https://www.diyaudio.com/forums/solid-state/5462-hiraga-le-monstre-132.html
£10 plus shipping and PayPal fee at cost.
2. TentLabs E Choke. Never been near a power source! Info here - Electronic Choke
£20 plus shipping and PayPal fee at cost.
3. K&K Audio Time delay/soft start board. Assembled but never powered up. Info here; Other kits – K & K Audio (about 3/4 way down)
£15 plus shipping and PayPal fee at cost
4. I got a bit enthusiastic about building a Tim Mellow OTL amp using the Ares Audio PCBs
OTL Power amplifier - ARESAUDIO electronics & audio engineering
but I've decided I can't justify yet another amplifier project so have to offer a set of boards, consisting of 2 x input/driver PCBs, 1 x Power Supply PCB and 1 x Soft Start/Protection PCB (including the microprocessor). The boards cost me 60Euros.
£28 plus shipping and PayPal fee at cost - I'll throw in 6 x 9pin tube sockets too.
Send me a PM if anything is of interest. Happy to post just about anywhere. I have some more stuff that I'll post in the next day or so.
1. Set of PCBs to build a Hiraga 'La Monstre' 8wpc Class A amp. I bought these from member 'sachu888' here on DIY Audio. Just the bare boards except that I've soldered a set of (genuine, purchased from Spencer) 2SJ74/2SK170 FETs. PSU boards are a cap multiplier. I have a BOM and the PCBs are well labelled. 'La Monstre' schematics etc. are available on the long thread here on DIY Audio. There are some build pictures here (look for member sachu888) https://www.diyaudio.com/forums/solid-state/5462-hiraga-le-monstre-132.html
£10 plus shipping and PayPal fee at cost.
2. TentLabs E Choke. Never been near a power source! Info here - Electronic Choke
£20 plus shipping and PayPal fee at cost.
3. K&K Audio Time delay/soft start board. Assembled but never powered up. Info here; Other kits – K & K Audio (about 3/4 way down)
£15 plus shipping and PayPal fee at cost
4. I got a bit enthusiastic about building a Tim Mellow OTL amp using the Ares Audio PCBs
OTL Power amplifier - ARESAUDIO electronics & audio engineering
but I've decided I can't justify yet another amplifier project so have to offer a set of boards, consisting of 2 x input/driver PCBs, 1 x Power Supply PCB and 1 x Soft Start/Protection PCB (including the microprocessor). The boards cost me 60Euros.
£28 plus shipping and PayPal fee at cost - I'll throw in 6 x 9pin tube sockets too.
Send me a PM if anything is of interest. Happy to post just about anywhere. I have some more stuff that I'll post in the next day or so.
Do I read it correctly: Hiraga PCBs with genuine 2sk170/2sj74 for £10?
What was I doing when this ad had appeared?
What was I doing when this ad had appeared?
Yep. I just hope the guy buying them builds them up and enjoys them because that's where their value lies.