Gainclone chipamp LM3875 stereo amplifier modules and power supply. I built this chipamp / gainclone several years ago and used it very little. I’ve recently re-purposed the chassis, so hopefully these gainclone parts will find a new home. Includes an Avel potted transformer (dual 22V, 130VA), and the populated PCBs. The amp boards have Blackgate Type N 4.7uf/50V input coupling caps and Blackgate 47uf non-polar feedback caps. Diodes are MUR860s. There are no binding posts included, but the included RCA jacks are Vampire gold/Teflon. The wiring is all Kimber TCSS Teflon. As you’ll see from the photos, I’ve left most of this wired together for ease of assembly for the buyer. You’ll also need an IEC inlet, fuse, and switch for power, plus a case of course. This setup was working great before recently being disassembled, but is sold as-is because I can’t be responsible for what the buyer does with it. Buyer pays actual shipping from 06905 (local pickup welcome). Figure about 8 pounds packed for shipping. $100 plus shipping.
Attachments
Last edited: