Well, if you could include DC speaker protection ...
edit : I first mentioned a power switch but careful looking at the pictures learnt me that it is under the front panel. Not standard but certainly a cool solution.
edit : I first mentioned a power switch but careful looking at the pictures learnt me that it is under the front panel. Not standard but certainly a cool solution.
Last edited:
SMPS400 used here has shutdown pin input so my DC sense module could do it (see it in First One thread).
Yes, third pic clearly shows power switch at bottom plate, just bellow front plate.
No input transformers present inside chassis.
Yelow blocks on First One (left, right PCB) are Fine Gold electrolytic capacitors from Nichicon.
Yelow blocks on SMPS400 (central PCB-s) are main switching power transformers.
- Status
- Not open for further replies.