I have this DAC for sale. It is the Weiliang Dual AK4399 + AK4118 receiver. I bought the unassembled version since the ones assembled on eBay have 80% counterfeit parts. So I assembled evrything myself with my own taste for parts. Using Elna Silmik II, Panasonic FC, Panasonic Polymer, Sanyo Oscon, Wima MKP, Elna for Audio Main supply caps, Amtrans AMCH in output filter. I will give LME 49710 metal can opamp with it. All parts are from Digikey or Mouser except Elna main supply caps and inductors.
Resistors, for the most part are PRP, Takman Metal Film and Susumu 0.1% 25ppm SMD. All SMD caps are C0G NP0 or X7R type
The output filter has been redone from AK specsheet for dual DAC since weiliang has diviated from it.
See project here
Dual AK4399
I'm only asking 120$ USD which is cheaper than the fleabay version with fake parts! All you will need is the transformer(s) and a digital source (for USB-->I2S, you can get an Xmos, eXD or Sonore card or the card that fit this DAC on fleabay)
Thanks
Do
Resistors, for the most part are PRP, Takman Metal Film and Susumu 0.1% 25ppm SMD. All SMD caps are C0G NP0 or X7R type
The output filter has been redone from AK specsheet for dual DAC since weiliang has diviated from it.
See project here
Dual AK4399
I'm only asking 120$ USD which is cheaper than the fleabay version with fake parts! All you will need is the transformer(s) and a digital source (for USB-->I2S, you can get an Xmos, eXD or Sonore card or the card that fit this DAC on fleabay)
Thanks
Do
- Status
- Not open for further replies.