Unit works perfectly although some refinement work need to be done for aligning better both the volume control and the switches. Rotating the control is not perfect as there is a slight misalignment between the switches rods and the Elma selector and volume attenuator. the attenuator works smoothly but the selector switch has some noise. I bough this for a fellow one year ago and he planned to re-case it in a new chassis. I bought it as is and due to transport issues I had to replace the 4 fast recovery diodes and with all the tight tolerances I could only reposition one of the cooling heatsink at 45 degrees. As said you can use the unit as it sounds perfectly but if you are a perfectionist you will not tolerate this. This is a 650mA unit
List of components:
Acoustic dimension attenuator, 41 steps (only this costs 150 Eur)
Elna selector
Jupiter Cu foil and wax coupling caps
Riken ohm and shinkoh
silver wiring
4 Inputs and 2 outputs
100Va trafo.
Will sell without the chassis bottom cones as too expensive and what to keep them.
Chassis is basic as you can see as the plane was to rehouse it., I put two stickers on front panel to make it nicer, they comes from my modular electronic activities.
Ship in Europe only and beware UK buyer will have probably to pay duties due to Brexit.
Toroid wired for 230 Volts.
Price 400 obo, shipping included
Paypal is fine
List of components:
Acoustic dimension attenuator, 41 steps (only this costs 150 Eur)
Elna selector
Jupiter Cu foil and wax coupling caps
Riken ohm and shinkoh
silver wiring
4 Inputs and 2 outputs
100Va trafo.
Will sell without the chassis bottom cones as too expensive and what to keep them.
Chassis is basic as you can see as the plane was to rehouse it., I put two stickers on front panel to make it nicer, they comes from my modular electronic activities.
Ship in Europe only and beware UK buyer will have probably to pay duties due to Brexit.
Toroid wired for 230 Volts.
Price 400 obo, shipping included
Paypal is fine
Last edited:
Pictures
Pictures
Pictures
Attachments
Last edited by a moderator: