SOLD
Asking $160, including ground shipping to the Continental USA
I had recently purchased the Classic Aleph 30 for UMS boards in the group buy, but have decided not to build the amp. Too many other things to do right now. I had collected all the parts to make the amp and am passing it on as a "kit" for the next owner to build. This is NOT a good first amp build for a beginner, I would recommend, as stated in the group buy, that you are an experienced builder.
Included in this sale are:
-Original group buy boards for an Aleph 30 (2 signal boards, one power supply board, 2 rectifier / snubber boards)
-All Capacitors / Resistors / diodes, etc., as called out on the V2 BOM, including the matched mosfets, 20 in all, as supplied with the group buy. Only parts not included are your board to board connectors, if you wish to use them.
-Antek AS-4222 power transformer, which was tested in another amp for 1 hour, works fine, but does have shortened leads as noted, which are very easy to lengthen with wire splices if you need them.
To complete an amp you would need to additionally purchase or have on hand:
All you need are board to board connectors, a proper chassis, like the 4 U x 400mm dissipante from the Store, wire, chassis connector and mains connector parts, etc.
Asking $160, including ground shipping to the Continental USA
I had recently purchased the Classic Aleph 30 for UMS boards in the group buy, but have decided not to build the amp. Too many other things to do right now. I had collected all the parts to make the amp and am passing it on as a "kit" for the next owner to build. This is NOT a good first amp build for a beginner, I would recommend, as stated in the group buy, that you are an experienced builder.
Included in this sale are:
-Original group buy boards for an Aleph 30 (2 signal boards, one power supply board, 2 rectifier / snubber boards)
-All Capacitors / Resistors / diodes, etc., as called out on the V2 BOM, including the matched mosfets, 20 in all, as supplied with the group buy. Only parts not included are your board to board connectors, if you wish to use them.
-Antek AS-4222 power transformer, which was tested in another amp for 1 hour, works fine, but does have shortened leads as noted, which are very easy to lengthen with wire splices if you need them.
To complete an amp you would need to additionally purchase or have on hand:
All you need are board to board connectors, a proper chassis, like the 4 U x 400mm dissipante from the Store, wire, chassis connector and mains connector parts, etc.
Last edited:
Someone is getting a great deal! See the builders thread post #1 for latest build doc.
Good call on 400 deep 4u chassis. With the higher secondary voltage this will run a little hotter and will have more output and a standard A30. Will it be A35? 40? 45?
Good call on 400 deep 4u chassis. With the higher secondary voltage this will run a little hotter and will have more output and a standard A30. Will it be A35? 40? 45?
Congratulations to the buyer; I assume Chromenuts! I was going to grab this. 🙂
Enjoy your amp! You are on a building spree.
Enjoy your amp! You are on a building spree.
Nope…not fast enough on the draw 🐌
Not a problem…already have an Aleph 60 kit hoarded…this was just too great a deal to not try and grab
Best to the lucky buyer!
Not a problem…already have an Aleph 60 kit hoarded…this was just too great a deal to not try and grab
Best to the lucky buyer!
I sent a PM around midnight but living in Canada didn’t help me...Vunce are you the lucky winner?
Regardless who it is have fun building, that’s what matters.
Regardless who it is have fun building, that’s what matters.
Received my Aleph kit today.
Fantastic packing job Matt, all pieces are in perfect condition!
Thank You
Fantastic packing job Matt, all pieces are in perfect condition!
Thank You
Glad they made it Vunce!
It is always a little dicey when you ship a big donut with lots of little fragile stuff.
Have a great holiday weekend!
Matt
It is always a little dicey when you ship a big donut with lots of little fragile stuff.
Have a great holiday weekend!
Matt
The trafo was packed better than when I order direct from Antek 
Yes, The boom booms have started......
Enjoy your holiday weekend as well.
Yes, The boom booms have started......
Enjoy your holiday weekend as well.
