• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Chokes for filaments

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
U

ultrafi

Disabled Account
Joined 2009
Pair 1 - 1.5mH at 11 amps, 3.0mH at 1 amp, 0.03 ohm DCR.

Pair 2 - 1.5mH at 11 amps, 5.0mH at 1 amp, 0.07 ohm DCR.

Terminals on ceramic standoffs.

All measure 78mm high by 58mm wide by 52mm deep. I suspect these are actually all the same just spec'ed a bit different. $30 per pair plus $15 shipping in the US.

IMG_0217.JPG
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom