• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Fs:ad1865n-k Non Over Sampling Dac Completed Board

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
This D/A made by myself, I designed from schematic of Audio Note Dac Kit 1.1 which shown in internet link but I changed something to go to hi-end concept such as

1.Changed low impedance +/- 5V to walt jung super regulator and spectral dmc-20 current biasing
2.Changed chip input receiver from CS8412 to CS814
3.Changed AD1865N to AD1865N-K grade
4.Changed ECC82 to ECC802S
5.Changed diode recifier to tube rectifier EZ-80 RCA

New schematic included if you want, PCB screened on top overlay and bottom layer

I sale only full assembled PCB + transformer+aluminium anodized chassis
I ask for 350 USD shipping included, email if you want other details

Paypal accept !

Thanks
ruydac
 

Attachments

  • img_0317.jpg
    img_0317.jpg
    56.4 KB · Views: 426
FS : Audio Note Dac5 Digital Board (original From Factory)

I bought from my friend but now I already have a cloned of it, this board included CS8414 + AD1865N-K + SUB REGULATOR

NOTICE: This board assembled in Audio Note DAC5 (30,000 €) not as DAC KIT !!! there're some different point on pcb !!!

Original from factory like a new board !


All capacitors are Black Gate Rubycon (Japan)
All resistors are ALLEN BRADLEY
Tested and ready to connect to valve buffer with ECC88 or ECC32 or ECC82 or ECC83

PAYPAL ACCEPT

I ask for 500 USD included shipping

Thanks
Rubydac
 

Attachments

  • 3e2a_1.jpg
    3e2a_1.jpg
    30.9 KB · Views: 286
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.