• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: (6) 6SL7GT **MILSPEC / USED **

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
All 6SL7WGT are Sylvania manufacture w/ green lettering, (1 is marked CBS/Hytron w/ red lettering.).

All have micanol brown composition bases.

No clinkers or loose parts in envelopes

(4) have identical plate construction.

(2) have full getters and plates are not visible, tubes match externally.

(6) all test well above rating on Hickok 539C and are EXCELLENT.

$32 - OBO w/ shipping

:note:

dZiGz.jpg
 
Last edited:
How well? How closely matched are the sides?

6SL7 rating -1050/1050

As follows:

#1 2300/2100
#2 2100/2100
#3 2100/2100
#4 1900/2100 (full getter)
#5 2000/2000
#6 1800/1700 (full getter)

These measurements were obtained after each had a good warm-up, about 90 seconds. The Hickok has a life test (reduced filament voltage) and when done the rating barely changed. #4 & #6 have scratches on the base, likely from socket clamps. The other (4) could be new but I do not know for sure. They are clean overall w/ excellent lettering but I am selling them as used.

:cheers:
 
Hi Speaker, The tubes arrived, and I've listened to them. They are EXACTLY like you said, either in new or like new condition, when tested on my Hikock 600A. They also sound terrific, by the way. Thanx so much for going the extra mile and getting them to me! Sincerely, gfederys.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.