Small heat sinks
Small heat sinks, see photo. Any or all are free for the USPS shipping cost.
They will all fit in a medium flat rate USPS box for $17.00 including the Paypal fee.
Small heat sinks, see photo. Any or all are free for the USPS shipping cost.
They will all fit in a medium flat rate USPS box for $17.00 including the Paypal fee.
Attachments
Last edited:
Hi Ray,
Interested in the heat sinks. How many are there, and will you ship to Canada. Postal Code: V0B 1E0.
MM
Interested in the heat sinks. How many are there, and will you ship to Canada. Postal Code: V0B 1E0.
MM
I just got my box of xlr and knobs
Thank you very Much. The knobs look great
If no one ask about the capacitors, message me. I could use more for my parts box
Thank you
Thank you very Much. The knobs look great
If no one ask about the capacitors, message me. I could use more for my parts box
Thank you
Small heat sinks, see photo. Any or all are free for the USPS shipping cost.
They will all fit in a medium flat rate USPS box for $17.00 including the Paypal fee.
Ray I would be interested in those small bright-colored heatsinks.
Jan
No problem, I've got the ten sinks wedged in with your other stuff in the small USPS box going out tomorrow.
Last edited:
More stuff available.
NOS 2SC3317, 100 pieces http://www.svntc.com/TPDF/2331.pdf
Wire cutters (like new), needle nose pliers (not)
NOS mini switches, good quality
Triad audio transformer 600:60k
Knobs
NOS LM4700 (isolated), LM2876 x2
NOS Mallory 140uF/460V x3 in boxes
NOS variable power supply kits HK-603 three pcs
(will need some kind of board and enclosure)
NOS 2SC3317, 100 pieces http://www.svntc.com/TPDF/2331.pdf
Wire cutters (like new), needle nose pliers (not)
NOS mini switches, good quality
Triad audio transformer 600:60k
Knobs
NOS LM4700 (isolated), LM2876 x2
NOS Mallory 140uF/460V x3 in boxes
NOS variable power supply kits HK-603 three pcs
(will need some kind of board and enclosure)
Attachments
Last edited:
No problem, I've got the ten sinks wedged in with your other stuff in the small USPS box going out tomorrow.
Muchas Gracias!
Jan
More parts
NOS large number Rifa safety caps 2 types
NOS Allen Bradley pots, misc values
NOS misc pcb relays
NOS 2" hinges
NOS Climax 2C-050, 1/2" ID, 2 piece split shaft collar, 8 pcs
NOS large number Rifa safety caps 2 types
NOS Allen Bradley pots, misc values
NOS misc pcb relays
NOS 2" hinges
NOS Climax 2C-050, 1/2" ID, 2 piece split shaft collar, 8 pcs
Attachments
Even more parts
Bags of hardware - see photo
solderless breadboards, several sizes - see photo
digital ICs (no photos)
M27256-3F1 EPROM (5 pcs)
AD7545ABQ 12-Bit DAC (4 pcs)
74ALS1638N (4 pcs)
74ALS00N (1 pc)
74LS109APC (1 pc)
74LS321N (1 pc)
Bags of hardware - see photo
solderless breadboards, several sizes - see photo
digital ICs (no photos)
M27256-3F1 EPROM (5 pcs)
AD7545ABQ 12-Bit DAC (4 pcs)
74ALS1638N (4 pcs)
74ALS00N (1 pc)
74LS109APC (1 pc)
74LS321N (1 pc)
Attachments
Last edited:
Received the BNC connectors, digital readout and terminator.
Just wanted to thank you again for your generosity.
Charles
Just wanted to thank you again for your generosity.
Charles
Dos
Raymond,
Got the circuit breadboard. Again thanks for your stellar generosity; certain to come back your way somehow.
Charles
Raymond,
Got the circuit breadboard. Again thanks for your stellar generosity; certain to come back your way somehow.
Charles
Added,
NOS group of ceramic capacitors from Digikey
NOS group of electrolytic capacitors from Digikey
NOS group of ceramic capacitors from Digikey
NOS group of electrolytic capacitors from Digikey
Attachments
Last edited:
I just found this thread. I will take any of the small parts, especially the leaded ceramic caps shown in post #39, the AD7545ABQ 12-Bit DACs, and any of the SMD parts shown in post #1 that that are not claimed by others.
I am building a modular music synthesizer which has both analog and digital circuitry in leaded and SMD format. There will also be some vacuum tube circuitry, but I have plenty of those parts.
I am building a modular music synthesizer which has both analog and digital circuitry in leaded and SMD format. There will also be some vacuum tube circuitry, but I have plenty of those parts.