David,
Sorry, here are the details
Tab: Drivers an Enclosures
Edit driver:
Punch in all the TS parameters until Rdc(included).
In the lower part of the screen there are two IMPORT buttons.
Place the checkmarks, 2 for FR, 2 for IMP.
After that push the "Calculate Le and Re".
Define where FR measurement took place.
Accordingly do the Enclosure tab and Baffle tab.
This should work.
Sorry, here are the details
Tab: Drivers an Enclosures
Edit driver:
Punch in all the TS parameters until Rdc(included).
In the lower part of the screen there are two IMPORT buttons.
Place the checkmarks, 2 for FR, 2 for IMP.
After that push the "Calculate Le and Re".
Define where FR measurement took place.
Accordingly do the Enclosure tab and Baffle tab.
This should work.
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.