Hey all,
I ended up being given a commercial projector so I no longer need to build one for my classroom. Any interest in the parts?
XXX SOLD XXXX Ushio SD400 (unused, only tested)
XXX SOLD XXXX s15 Lens Kit (with triplet)
XXX SOLD XXX Norpro Reflector (already cut to size)
2 Sunon 1123HBT 120x38mm Fans (87-107cfm and 45-50dba)
Benq FP567s (V2) 15" LCD (crappy camera pic....sorry)
(IMG:http://usera.imagecave.com/heydre/DSCN1054.JPG)
Links for stripping monitor: http://www.lumenlab.com/forums/index.php?s...ic=545&st=0 )
http://www.lumenlab.com/forums/index.php?showtopic=3180
LumenLab 400MHD Electronic Ballast
Ritetemp Electronic Thermostat
Wiring/Paint/Switches/Vents/Filters
- 2 Vents are louvered and only open when there's air pressure
- 10 ft wiring is 12 AWG and gas/oil resistant (good up to 90 degrees Celsius)
- Rust-Oleum Black High Heat (1200 F) for inside and Rust-Oleum Clear Enamel for outside (covers around 25sq. ft each)
- 1 DPDT center off toggle switch
- 1 Six circuit terminal strip
- Package of 4 10A fast acting fuses (250v)
- Package of 5 butt splices
- Printed wiring diagrams for my supplies (diagrams from Lumenlab posts)
- 10ft x 7in flashing
- Black filter cloth
- 12 pack of electrostatic filter cloth
- Blackout felt
Plywood Box
(US Shipping will come from 97701) CALCULATE YOUR INTERNATIONAL SHIPPING HERE: http://ircalc.usps.gov/
Note that this isn't some desperation fire sale so be reasonable...
Good buyer references if you need them!
I ended up being given a commercial projector so I no longer need to build one for my classroom. Any interest in the parts?
XXX SOLD XXXX Ushio SD400 (unused, only tested)
XXX SOLD XXXX s15 Lens Kit (with triplet)
XXX SOLD XXX Norpro Reflector (already cut to size)
2 Sunon 1123HBT 120x38mm Fans (87-107cfm and 45-50dba)
Benq FP567s (V2) 15" LCD (crappy camera pic....sorry)
(IMG:http://usera.imagecave.com/heydre/DSCN1054.JPG)
Links for stripping monitor: http://www.lumenlab.com/forums/index.php?s...ic=545&st=0 )
http://www.lumenlab.com/forums/index.php?showtopic=3180
LumenLab 400MHD Electronic Ballast
Ritetemp Electronic Thermostat
Wiring/Paint/Switches/Vents/Filters
- 2 Vents are louvered and only open when there's air pressure
- 10 ft wiring is 12 AWG and gas/oil resistant (good up to 90 degrees Celsius)
- Rust-Oleum Black High Heat (1200 F) for inside and Rust-Oleum Clear Enamel for outside (covers around 25sq. ft each)
- 1 DPDT center off toggle switch
- 1 Six circuit terminal strip
- Package of 4 10A fast acting fuses (250v)
- Package of 5 butt splices
- Printed wiring diagrams for my supplies (diagrams from Lumenlab posts)
- 10ft x 7in flashing
- Black filter cloth
- 12 pack of electrostatic filter cloth
- Blackout felt
Plywood Box
(US Shipping will come from 97701) CALCULATE YOUR INTERNATIONAL SHIPPING HERE: http://ircalc.usps.gov/
Note that this isn't some desperation fire sale so be reasonable...
Good buyer references if you need them!
- Status
- Not open for further replies.