Hello,
So, I have listed this amp on Ebay but would prefer someone from this community purchase it. If you're interested, please let me know (and you should have no problem finding the listing on Ebay where I've posted many photos).
Elekit TU-8200R. Fully assembled and working great.
I built this amp about 12 months ago and have greatly enjoyed it.
The condition is very good. Everything functions as it should. There is a scratch on the top of the chassis, a couple of scratches on one side and a single scratch on the other side. These are all from normal use (installing and removing it from my ventilated AV cabinet). I have shown the scratches in the photos.
Modifications that I made:
1. Upgraded the output transformers to the Lundahls (see photos)
2. I added a switch that allows you to change from Ultra Linear to Triode mode without opening the case and moving the jumpers.
3. Mundorf EVO Supreme Silver Gold capacitor upgrade (4 caps)
I am including 3 matched pairs of NOS, US made 12AU7 tubes. Only 1 pair has been used, the others I have never run.
I am also including a matched pair of Mullard KT-88's. I don't have a tube tester, but these are less than a year old.
All together, here's roughly what my cost was:
Elekit 8200-R - $895
Mullard KT-88 pair - $100
3 pair NOS 12AU7 (US) - $150
Capacitor upgrade - $180
Lundahl Output Transformer Upgrade - $350
I'm selling it because I simply have too many amps right now. I was just gifted a Scott 299D that I'm working on restoring, I have a finished a Bottlehead kit, a recapped NAD 3020A and I'm trying out a Hypex build. Simply have to make room.
Please message me if you have any questions. Thank you!
So, I have listed this amp on Ebay but would prefer someone from this community purchase it. If you're interested, please let me know (and you should have no problem finding the listing on Ebay where I've posted many photos).
Elekit TU-8200R. Fully assembled and working great.
I built this amp about 12 months ago and have greatly enjoyed it.
The condition is very good. Everything functions as it should. There is a scratch on the top of the chassis, a couple of scratches on one side and a single scratch on the other side. These are all from normal use (installing and removing it from my ventilated AV cabinet). I have shown the scratches in the photos.
Modifications that I made:
1. Upgraded the output transformers to the Lundahls (see photos)
2. I added a switch that allows you to change from Ultra Linear to Triode mode without opening the case and moving the jumpers.
3. Mundorf EVO Supreme Silver Gold capacitor upgrade (4 caps)
I am including 3 matched pairs of NOS, US made 12AU7 tubes. Only 1 pair has been used, the others I have never run.
I am also including a matched pair of Mullard KT-88's. I don't have a tube tester, but these are less than a year old.
All together, here's roughly what my cost was:
Elekit 8200-R - $895
Mullard KT-88 pair - $100
3 pair NOS 12AU7 (US) - $150
Capacitor upgrade - $180
Lundahl Output Transformer Upgrade - $350
I'm selling it because I simply have too many amps right now. I was just gifted a Scott 299D that I'm working on restoring, I have a finished a Bottlehead kit, a recapped NAD 3020A and I'm trying out a Hypex build. Simply have to make room.
Please message me if you have any questions. Thank you!