Those are 2.2uF 250v film caps (CCB). Yes, hooligans wired the outputs as they are speaker wire fused together. I ran out of single strand wire at the time
There's a nice 390uF 20v oscon that will be perfect for this. A bit larger than 330uF and we don't need 25v since supply is 18.5v. Best part is that I have a big bag of them leftover from BOM for PCA since so many people are opting for the NHB with 1000uF 16v oscon.
limits, you might be bypassing the jantzens if the leads are touching the aluminium enclosure that they are in, at both ends.
16, only 9 more.
Please put me down for two of each board.
There is a thread where it lists the parts that need to be ordered, right?
Many thanks,
Barry
There is a thread where it lists the parts that need to be ordered, right?
Many thanks,
Barry
Hi,
As discussed by PM, I'd like 2 Amp boards and 2 Antipole boards, destination The Netherlands.
Take care,
Laurens
As discussed by PM, I'd like 2 Amp boards and 2 Antipole boards, destination The Netherlands.
Take care,
Laurens
I have a lot of documentation with BOM's that are uploadable to mouser, pictures, etc, that all get emailed to anyone who gets PCB's.
That's 27! Initial GB funding for printing complete, info PM'd for payment. The list is open till 40 for GB price and there will be boards available at regular price after 40 GB boards are sold.
That's 27! Initial GB funding for printing complete, info PM'd for payment. The list is open till 40 for GB price and there will be boards available at regular price after 40 GB boards are sold.