Focal 10V6412 in Transmission Line

[panterka]

Bye .

I have small question, can it someone applied loudspeaker Focal 10V6412 in Transmission Line or in different application.

pa_nterka1@o2.pl

 

[qwad]

If the QTs is around 0.30 yes!, you can use it in a TL IMHO perhaps others may shed more info for you as to other applications as I am not familiar with this driver...... cheers😀 Tomcat

 

[Vigier]

T/S Parameters of the 10V6412:
Re = 5.30 Ohm
Le = 1.30 mH
Fs = 37 Hz
Qms = 4.30
Qes = 0.40
Qts = 0.36
Rms = 2.20 Ns/m
Mmd = 37.47gr
Mms = 40.00gr
Cms = 0.45mm/N
Cas = 5.2e-07 m^5/N
Vas = 73.00 L
Sd = 340 cm²
BL = 11.20N/A
Pmax = 100W
Xmax = 16.5mm p-p
Airgap Height = 6.0mm
Voicecoil Height = 22.5mm
Efficiency = 0.89% --> 91.5 dB/1W/1m

Grtz, Joris

 

[panterka]

http://www.focal.tm.fr/gb/compo/woofer/10v6412.htm

Here parameters 10V6412 are.

Fs 50 Hz

Qts 0,42

Sd 346,4 cm^2

pa_nterka1@o2.pl

 

[Vigier]

Hmm...that's pretty weird,

my parameters come from the lspCad Database, and they are NOT the same as the Focal homepage says... 🙁

Grtz, Joris

 

[GM]

Using Focal's specs, a ML-TL looks good:

T/S max flat:

rp = 2"
Lp = 5"
density = 0.4lbs/ft^3

L (in)
29.941

S0/SL (in^2)
78.491

S0/SL (width)
11.270

S0/SL (depth)
6.965

X0 (in)
12.228

Sd (in^2)
53.692

Qts
0.4234

Vas or Vb(ft^3)
1.36

Fs or Fb (Hz)
47.6

All dims inside
'rp' = radius of port
'Lp' = length of port
'XO' = centerline of driver down from top
width/depth are golden ratio suggestions, you can make your own based on 'S0/SL (in^2)'
dims can be rounded off somewhat, I just printed out part of a spreadsheet

GM