I have just repaired two of these rather nice amplifiers.
There is no schematic or information available, so it was experience alone!
The first one was fairly easy; Distortion when increasing the output level. I replaced the MOS FET output stages and that sorted that one.
The second had weird noises and distortion; replace the Sony BX chips and repair the power supply fault that caused the problem in the first place.
I replace the power supply components in the first one as well as the second for added reliability.
I do like a challenge.
Welcome to my Web site
There is no schematic or information available, so it was experience alone!
The first one was fairly easy; Distortion when increasing the output level. I replaced the MOS FET output stages and that sorted that one.
The second had weird noises and distortion; replace the Sony BX chips and repair the power supply fault that caused the problem in the first place.
I replace the power supply components in the first one as well as the second for added reliability.
I do like a challenge.
Welcome to my Web site
Yes they do. With the moles the power supply running at 110volts tends to be strained and can fail at heavy and prolonged sound levels.
Nice amps though!
see Flying Mole Service
Nice amps though!
see Flying Mole Service
The link is broken for Flying Mole Service. Please use Flying Mole Repairs
Thank you
Thank you
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.