Hello there,
I just received an e-mail from Papa ... yesterday there were enough LUs on their way to me!
Many, many thanks Pa!
I just received an e-mail from Papa ... yesterday there were enough LUs on their way to me!
Many, many thanks Pa!
Just to be clear: the bridge rectifier board is a double bridge, so you only need one for an F3. (I'm sure some of you are ordering extras for other amps, but I just wanted to make sure there wasn't any confusion.)
Cheers,
Jeff.
Cheers,
Jeff.
Hello Carsten,
If still possible I would take an additional extra board for the bridge rectifier. That would make then 3 in total.
Thanks
Stephan
If still possible I would take an additional extra board for the bridge rectifier. That would make then 3 in total.
Thanks
Stephan
@lohk,
noted.
@all,
- shipping boxes was ordered today (lowered price as expected)
- to have some lead time ...., please this by PN to me with:
-- nickname
-- number of "Shipping costs / options:"
-- your address for shipping
The privat data will not be shown to all, only for me. After this gb I will delete all data.
noted.
@all,
- shipping boxes was ordered today (lowered price as expected)
- to have some lead time ...., please this by PN to me with:
-- nickname
-- number of "Shipping costs / options:"
-- your address for shipping
The privat data will not be shown to all, only for me. After this gb I will delete all data.
Hi all,
found some cheaper shipping options, please take a look to the sheet, thanks.
At the weekend (hopefully) I will try to find an other shipping partner to reduce the costs more.
found some cheaper shipping options, please take a look to the sheet, thanks.
At the weekend (hopefully) I will try to find an other shipping partner to reduce the costs more.
Hi Carsten
I would also like to sogn up for 1 set of F3 Boards and 2 x rectifier boards
Thanks
Rolle
I would also like to sogn up for 1 set of F3 Boards and 2 x rectifier boards
Thanks
Rolle
@All,
first, the LUs are here, thanks to Pa!
I can reduce the price for a F3 set to 18,50€ 🙂
Also I could reduce the price for a DB board to 1,50€
The price for an F3 set is now calculated with custom fees (incl.), if no custom fees I will spend them to diy audio.com.
If someone doesn't like that he can stop his interest and leave the group buy, please let it me know and I will calculate the price new.
Closing group buy will be done at:
- 50 group buy member (max of LUs, two for each group buy member)
- or count of 75 F3 sets.
- Finaly at 28.07.2019 (23:59:59) ;-)
PLease:
- send me you shipping address (if not done) till 31.07.2019
- send me you shipping option (if not done) till 31.07.2019
- send me your email address (for PayPal invoice) till 31.07.2019
I will order the boards only when all member has paid! The payment must be made within 14 days after invoice!
Should someone not pay in the 14 days timeframe after invoice, i'll think about closing the entire GB and ordering nothing and the payments will be refunded.
first, the LUs are here, thanks to Pa!
I can reduce the price for a F3 set to 18,50€ 🙂
Also I could reduce the price for a DB board to 1,50€
The price for an F3 set is now calculated with custom fees (incl.), if no custom fees I will spend them to diy audio.com.
If someone doesn't like that he can stop his interest and leave the group buy, please let it me know and I will calculate the price new.
Closing group buy will be done at:
- 50 group buy member (max of LUs, two for each group buy member)
- or count of 75 F3 sets.
- Finaly at 28.07.2019 (23:59:59) ;-)
PLease:
- send me you shipping address (if not done) till 31.07.2019
- send me you shipping option (if not done) till 31.07.2019
- send me your email address (for PayPal invoice) till 31.07.2019
I will order the boards only when all member has paid! The payment must be made within 14 days after invoice!
Should someone not pay in the 14 days timeframe after invoice, i'll think about closing the entire GB and ordering nothing and the payments will be refunded.
Attachments
Last edited:
Many thanks for the BOM!
Small hint for the Google BOM Doc: The images concerning Jeff's drawings link to very low resolution images, which are difficult to read.
Maybe that has been a topic before:
The original double voltage Firstwatt power supply is probably not really suitable for the F3. Or do you just add the voltages is series?
I strongly suggest a single voltage psu.
Small hint for the Google BOM Doc: The images concerning Jeff's drawings link to very low resolution images, which are difficult to read.
Maybe that has been a topic before:
The original double voltage Firstwatt power supply is probably not really suitable for the F3. Or do you just add the voltages is series?
I strongly suggest a single voltage psu.
Last edited:
Thanks,
please click on the pic, then try to download (top right) .... on my 4k monitor they are sharp ... but I will show to this if I'm back.
please click on the pic, then try to download (top right) .... on my 4k monitor they are sharp ... but I will show to this if I'm back.
Hi Carsten,
Please put me down for a set with double bridge and shipping option 5.
I will send rest of details by PM.
Carlos
Please put me down for a set with double bridge and shipping option 5.
I will send rest of details by PM.
Carlos
Hello Cartsen
please put me down for one set of F3 boards, 3 rectifier boards, option 2 for shipping. Detail per PM.
br
Helmut
please put me down for one set of F3 boards, 3 rectifier boards, option 2 for shipping. Detail per PM.
br
Helmut