• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

First Watt F1 Boards

Status
Not open for further replies.
Jump to Latest
S

suds

Member
Joined 2006
#1
Hi,

First Watt F1 clone PCB's set (Amp Boards and Power Supply Boards)

2 of Amp boards (Left and Right channel) Plus one Power Supply Board
3 PCB set will cost $30 plus postage / shipping charges as per EMS, intl currier charges.

Board PCB Images are available, cannot post here due to size constraints. will mail you on request.

-suds
 
#7
Delay- Due to PC down

Hi,

Due to Virus, my PC was down, so could not update you all.

I was not able to get ZTX550, so I am using BC557 as substitute.

IRFP240 and IRFP9240, pair was available for $6 (pair).


-suds
 
#9
F1 Board Tested.. !

Hello Everybody!!

Merry Xmas & Happy New Year..

Sorry fo delay due to holidays, and parts availability.

Final Stage of F1 Amp

Now that I have a working F1 Amplifier.... Observed the following...
(I did not put Heat sink.)

MOSFET becomes Very very Hot.. (Q3 and Q4 Smokes with out heat sink)
Thick Heat sink with silicon paste and insulation is required.

Quality of sound is very good.. !

I will I have signed up with paypal, will mail details tomorrow...

Instead of ztx550, BC557 is used.

Attached is parts list I used.
 

Attachments

#13
Image Amp Solder side

Hi,

Boards are available.

Images of Amp (both Side) and PS board.

(Scratches visible are from Glass of scanner)

-Suds
 

Attachments

  • f1-images1.jpg
    f1-images1.jpg
    88.1 KB · Views: 1,429
#16
Hi Suds,
:cop:
Post a price list please. Buys should be out in the open as far as prices are concerned. Let's keep things clean if we can.

Did Nelson approve of your buy?
:cop:

-Chris

Edit: I removed your email link. It's that same as your listed email on your button. Just protecting you from spam.
 
#17
Buys for F1 PCB

Hi,

I had posted the Prices of DIY PCB's before..

This is DIY PCB F1 Clone means for DIY users, Not commercial.

I am not a commercial reseller or manufacturer.
I am also one of the DIYer.

Prices are as follows for F1 PCB's.

For one stereo Set PCB (2x Amp PCB's and 1 x Power PCB) $36 plus shipping ($21 onwards)

I cannot post images due to size (file is 2.5MB) I posted e-mail address.


Thanks
suds
 
#18
Hi suds,
Cool, all I know is what I can see in this thread. Many members might see things for the first time here, so a reposting of your pricing should almost be the first post in a thread. Somewhere near the top anyway.

If you post your pics on a server, you can link to them in a post. That's how members can get more than one photo per post in.

-Chris
 
Status
Not open for further replies.
Top Bottom