Well here they are after much time and money . This is a mono version of JE LABS se 2a3. Output iron is Plitron, all Black gate caps. signal caps are Jensen
copper foil, resistors are Riken ohm. The sound is very good matched with the
OEM recomended bhl cabinet using the Fostex 166. I do find the low bass may be a bit less than the stereo version, the only difference besides the caps is the bias on output tubes in the mono version is a bit less. Thanks to all who helped
copper foil, resistors are Riken ohm. The sound is very good matched with the
OEM recomended bhl cabinet using the Fostex 166. I do find the low bass may be a bit less than the stereo version, the only difference besides the caps is the bias on output tubes in the mono version is a bit less. Thanks to all who helped
Attachments
- Status
- Not open for further replies.