Files .zma and frd for xsim for Satori MW19P 8

[santitrucco]

Somebody have the files .zma and frd ir dxo for xsim for Satori MW19P 8?

 

[jayme]

here you go

 

[santitrucco]

Those are the grafics , i need frd and zma files.

 

[shadowplay62]

Somebody have the files .zma and frd ir dxo for xsim for Satori MW19P 8?

Here you go, again...

 

[jayme]

let me know if you need other SBAcoustics drivers. i have a bunch

Those are the grafics , i need frd and zma files.

damn. sorry. i had the whole library of SB Acoustics zma/frd files stored on my old phone. looks like when I upgraded to the new one, the automated file transfer only transfered the JPG and PDF files! I guess i lost the text files on my phone.

i will check to see if I backed them up elsewhere....

 

[AlmaAtaKZ]

Well, if you find them, I would appreciate a copy, too!

 

[santitrucco]

Ok, and someone have zma frd from tweeter satori tw29r , or Bliesma t34b ?
I have both.
Thanks

 

[santitrucco]

Those are FRD Y ZMA from Satori MW19P 8.
Shadowplay62 send them and go well.

 

[stoneeh]

When you are searching for something, either put a question mark at the end of the thread title, or title the thread "looking for xy". The way the title currently is suggests you're offering something, not asking for something.

 

[shadowplay62]

Ok, and someone have zma frd from tweeter satori tw29r , or Bliesma t34b ?
I have both.
Thanks

Here they are.

 

[WhiteDragon]

To acquire FRD or ZMA from datasheet you need Tracer.

Just trace the datasheet, Use tracer in Virtuix cad.
Is learning curve to set the markers to Hz and Ohms so trace is accurate.

You cannot design crossover with just trace.
You need to simulate Baffle , Off Axis responses and set mounting distances so phase is correct.

Also can be done with Virtuix Cad