Are you selling any that are fully done? With my illness with my hands it’s hard to do the smaller work any longer
Hi,
Thanks for your interest. I don't have a local source for boxes and tools to drill holes etc. I can provide you fully soldered boards. You will only need to make wiring inside the boz with power and RCA.
Regards
Sachin
That’s pretty much all I need. And I’ll get a link to where to finish this. I’ve been reading the post and it’s so full of info and so easy to get lost in it
Hi Sachin,
please count me in, if there are still PCBs available. I would love to receive a AD797 Phono Stage board and hopefully TWO power supply boards (could use one for rod elliott's P06 phono stage). I am really happy that you are taking care of all this... I have come here from the original "Super High End Phono Stage" thread over at Audiokarma (could not find if those PCBs are still made).
thanks so much!
eschenborn
please count me in, if there are still PCBs available. I would love to receive a AD797 Phono Stage board and hopefully TWO power supply boards (could use one for rod elliott's P06 phono stage). I am really happy that you are taking care of all this... I have come here from the original "Super High End Phono Stage" thread over at Audiokarma (could not find if those PCBs are still made).
thanks so much!
eschenborn
Thanks eschenborn
I still have PCbs for AD797 and Power supply. I also have latest boards of Audiokarma CNC MM Phonostage , designed by Hypnotoad. Please check your PM.
Regards
Sachin
I still have PCbs for AD797 and Power supply. I also have latest boards of Audiokarma CNC MM Phonostage , designed by Hypnotoad. Please check your PM.
Regards
Sachin
Hi Sachin,
awesome. reply to PM sent.
I find it so cool that you nourish this audio "commons" here by caring for a supply of parts. a big thanks again, and a warmhearted thanks to all others implied in creating the whole thing (or, rather, all these things).
After using the recapped and upgraded phono sections of some vintage amps I have started to try external DIY phono stages; first a german built one (the "Aikido Phono Riaa Vorverstärker") with FETs and passive equalization (unfortunately no schematics is findable).
I am going to build rod elliott's P06 and then, thanks to you all, the CDC stage. and then on to testing my first MC with the AD797 stage and comparing it with the MC head-amp in my KA-6000 which I have never tried so far. that is the dream, at least...
so far I have found that MM can give amazing results if I take the time to dial in the right resistive and capacitive load. I am slow as time is limited, but curious!
eschenborn
awesome. reply to PM sent.
I find it so cool that you nourish this audio "commons" here by caring for a supply of parts. a big thanks again, and a warmhearted thanks to all others implied in creating the whole thing (or, rather, all these things).
After using the recapped and upgraded phono sections of some vintage amps I have started to try external DIY phono stages; first a german built one (the "Aikido Phono Riaa Vorverstärker") with FETs and passive equalization (unfortunately no schematics is findable).
I am going to build rod elliott's P06 and then, thanks to you all, the CDC stage. and then on to testing my first MC with the AD797 stage and comparing it with the MC head-amp in my KA-6000 which I have never tried so far. that is the dream, at least...
so far I have found that MM can give amazing results if I take the time to dial in the right resistive and capacitive load. I am slow as time is limited, but curious!
eschenborn
Thanks eschenborn. I am almost certain , you will be pleased with AD797 phonostage.
Regards
Sachin
Regards
Sachin
All the modules/boards have been shipped. Most of the members have received them.
I can take more orders now.
Regards
Sachin
I can take more orders now.
Regards
Sachin
What’s the price for a full diy AD797 phonostage kit with all the parts
Other then the case
I’m sure I’ve been told but I’ve been doing so many other things I can’t remember where I parked my truck [emoji23]
Other then the case
I’m sure I’ve been told but I’ve been doing so many other things I can’t remember where I parked my truck [emoji23]
Please can you tell me how much a phono stage board and PSU board would be? also the same with all the parts you have available and how to order?