Is the above type of diodes good for audio equipment power supply?
I have some of these with part number BYD-33D made by Philips. I am thinking whether to use them for my DAC power supply.
Rating
continuous reverse voltage: 400V
average forward current: 1.3A
reverse current: 1uA
reverse recovery time: 250ns
diode capacitance: 20pF
maximum slope of reverse recovery current: 6A/ms
What are your opinions on these diodes?
I have some of these with part number BYD-33D made by Philips. I am thinking whether to use them for my DAC power supply.
Rating
continuous reverse voltage: 400V
average forward current: 1.3A
reverse current: 1uA
reverse recovery time: 250ns
diode capacitance: 20pF
maximum slope of reverse recovery current: 6A/ms
What are your opinions on these diodes?
Fast-soft recovery avalanche rectifiers
I think the ratings are probably more than adequate for the average DAC. The Musical Fidelity X-DAC V3 ,for example, uses a .5A "wallwart" How much current does your DAC draw ?
Personally , I would go for the UF4004 which has a 400V 1A rating and 50nS recovery time . This diode should be even quieter. They are less than AU$1 each. For most switchmode power supply bridge rectifier use (DVD players,Set Top Boxes etc.) the BYV26c is a great choice with it's 600V 1A rating and 30nS reverse recovery time. However the forward voltage drop is higher than the UF4004. The UF4007 is often used in these supplies because of it's 1,000V rating,but it is a little slower at 75nS.
SandyK
I think the ratings are probably more than adequate for the average DAC. The Musical Fidelity X-DAC V3 ,for example, uses a .5A "wallwart" How much current does your DAC draw ?
Personally , I would go for the UF4004 which has a 400V 1A rating and 50nS recovery time . This diode should be even quieter. They are less than AU$1 each. For most switchmode power supply bridge rectifier use (DVD players,Set Top Boxes etc.) the BYV26c is a great choice with it's 600V 1A rating and 30nS reverse recovery time. However the forward voltage drop is higher than the UF4004. The UF4007 is often used in these supplies because of it's 1,000V rating,but it is a little slower at 75nS.
SandyK
Thank all for your help.
I have very limited choices. I can't find UF400X at local shops.
BYV-95Cs may be available. I will try to look for these.
My DAC is still on paper. It's a bit complicated to calculate the current drawn. Briefly, it has three modules:
1. Digital consists of cs8414, one crystal oscillator a 4 glue logic ICs: powered by one LM317 and then one REG104-5
2. Main: 2xPCM63 powered by LM317, LM337 and then 4x TL431
3. Analog: Pass D1 clone powered by LM317 and LM337
Each module has separate transformer and rectifiers. I think 1A should be enough.
Beside those BYD-33D, I also have a bunch of RU1Ps diodes. These are rated 1000V/0.4A/100ns. I am afraid that 0.4A would not be enough These RU1P looks really hugh despite the 0.4A rating. They do not have soft recovery feature that the BYD-33Ds have.
It it safe to try these 0.4A diodes?
I have very limited choices. I can't find UF400X at local shops.
BYV-95Cs may be available. I will try to look for these.
My DAC is still on paper. It's a bit complicated to calculate the current drawn. Briefly, it has three modules:
1. Digital consists of cs8414, one crystal oscillator a 4 glue logic ICs: powered by one LM317 and then one REG104-5
2. Main: 2xPCM63 powered by LM317, LM337 and then 4x TL431
3. Analog: Pass D1 clone powered by LM317 and LM337
Each module has separate transformer and rectifiers. I think 1A should be enough.
Beside those BYD-33D, I also have a bunch of RU1Ps diodes. These are rated 1000V/0.4A/100ns. I am afraid that 0.4A would not be enough These RU1P looks really hugh despite the 0.4A rating. They do not have soft recovery feature that the BYD-33Ds have.
It it safe to try these 0.4A diodes?
They should be fine (the first ones, not the .4A jobs). Put a small cap across each one, I usually use a small 0.1uF polyester, to kill any remaining RF. IMO, any power supply diode needs that. With any clocks off, sniff your power supply with an AM radio tuned between stations, to see if it's radiating anything.
- Status
- Not open for further replies.