I'm in the GB spreadsheet for 48 diodes. My BOM says that 48 will cover 4 F5TV3 channels and 4 PSUs. Would someone please let me know if I have miscalculated? Thanks!
I counted 24 pcs for 2 F5Tv3 channels and 2 power supplies, so your math looks good!
Yes. They are also the specific diodes in the bias circuit of the amp --- they are being used in the PSU just to keep things simple. (Plus they will do a great job there as well!)
Thanks for the backcheck, Ungie! Hi Buzzforb. Correct me if I'm wrong but from the F5T info I thought one V2 PSU would be needed per V3 channel so I tallied up 16(output) + 8(2 PSUs) per stereo V3. I am projecting 2 so 48 total for my project 🙂
If all goes as planned (not very often), I should begin packaging fets next weekend. Final sorting will start at the beginning of the week....hopefully.
I'd be interested in some FQA's & MUR3020W. Are there amy issue with me signing up for this with me being a newbie and shipping to the UK?
I am actually building an Aleph 60 and was wondering if I can use any of these Fairchild transistors for it?
MOst of th aleph amps were a Quasi push-pull topology using only one polarity of device. Either way, you should have no problem using Fqa16n25c in the output stage vs the traditional irf240. THe FE could use either Toshiba 2sj313 or you could update with Toshiba Jfets.
- Status
- Not open for further replies.