• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

F5X Transformers

Status
Not open for further replies.
Jump to Latest
M

mravinsky

Member
Joined 2006
#1
This is an offer from Toroidy for F5X transformers. These are the characteristics of them:
600VA audio quality transformer
Primary: 230V, 50Hz
Secondaries: 2x16V, Bifilar wound
Shields:
- Electrostatic shield between primaries and secondaries with earthing
connections
- Electromagnetic shield on the perimeter outside the secondary winding
Isolation:
Temperature class B , 130⁰C per IEC 085 Ta 60⁰C VDE0570 EN/IEC 61558 IP 00
Test voltage:
Primary - secondary: 5000V
Secondary -Secondary: 500V
Dimensions:
Outer diameter ~145mm
Height ~57mm
Electrical connections: Free-length enamel wire 200mm long
Fixation: open core not potted, centre bolt, disk & rubber gasket.
Therefore, the transformers accomplish all the specifications made by Patrick( EUVL). The price for each piece is 69,40 EUR if we buy 10 to 20 pieces, and 65,80 EUR if we go for 20 to 30 pieces (prices with 23% VAT included).
The shipping is a little expensive, because a package up to 30kg to Spain is 28,00 EUR (The app. weight for a transformer is 5Kg) .From an earlier post in the forum it's 15,00 EUR to Germany.
Perhaps we can find a cheaper shipping method.
If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers


Antonio
 
#8
If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers
- NicMac 2 transformers
- Ramallo 2 transformers
- Oneoclock 2 transformers
- pmchoong 2 transformers
- potepuh 2 transformers
 
#9
If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers
- NicMac 2 transformers
- Ramallo 2 transformers
- Oneoclock 2 transformers
- pmchoong 2 transformers
- potepuh 2 transformers
- JBdV 4 transformers
 
Last edited:
#10
Choong,

If sent from Germany to Malaysia, shipment would be 55 Euros for 10kg (as far as I understand 5kg per Tx),
or 80 Euros for 20 kg if you go over the 10kg limit.

On top of that you still have to pay shipment from Poland to Germany.
There is no direct shipment possible from Poland to Malaysia, as I understand.

So maybe it is better for you to go with a US GB (if there is one in the pipe).


Patrick
 
#11
If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers
- NicMac 2 transformers
- Ramallo 2 transformers
- Oneoclock 2 transformers
- pmchoong 2 transformers
- potepuh 2 transformers
- JBdV 4 transformers
- APK 2 transformers
 
#14
This is to open a new group buy for the transformer supplying the auxiliary PS for the protection board.
The specifications given by Toroidy are:
transformer 230V 2x12v 15VA.
Measures: Outer diameter ~58mm / height~28mm (with mounting tab)

Audio quality: 17,00 €

The price is 8 to 15 pieces
For high quality audio transformers we're using measured, selected,
high inductive cold rolled grain oriented (CRGO) silicon steel strips
cores In audio grade transformer price You'll get transformer wound on
high inductive, selected and measured core. Core and all the windings
will be impregnated. Transformer will also has electric and
electromagnrtic shields, epoxy filled interior and mounting pads in
price.
As in the case of main transformers, if you are interested put your name and quantity below.
- Mravinsky 1 Auxiliary transformer
 
#16
I assume both types of transformers will ship together so maybe it would be more simple to keep a single list like below. Or am I missing something?

If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers + 1 Auxiliary transformer
- NicMac 2 transformers + 2 Auxiliary transformers
- Ramallo 2 transformers + 1 Auxiliary transformer
- Oneoclock 2 transformers + 1 Auxiliary transformer
- pmchoong 2 transformers
- potepuh 2 transformers
- JBdV 4 transformers
- APK 2 transformers
 
#17
If you are interested, please, put your name and quantity below:
- EUVL 2 transformers
- Mravinsky 2 transformers + 1 Auxiliary transformer
- NicMac 2 transformers + 2 Auxiliary transformers
- Ramallo 2 transformers + 1 Auxiliary transformer
- Oneoclock 2 transformers + 1 Auxiliary transformer
- pmchoong 2 transformers
- potepuh 2 transformers
- JBdV 4 transformers
- APK 2 transformers
- heinz1 2 transformers + 1 auxiliary transformer

Thanks, Antonio, for setting up this and the new groupbuy:
 
Last edited:
#18
- EUVL 2 transformers + 2 Auxiliary transformers
- Mravinsky 2 transformers + 1 Auxiliary transformer
- NicMac 2 transformers + 2 Auxiliary transformers
- Ramallo 2 transformers + 1 Auxiliary transformer
- Oneoclock 2 transformers + 1 Auxiliary transformer
- pmchoong 2 transformers
- potepuh 2 transformers
- JBdV 4 transformers
- APK 2 transformers
- heinz1 2 transformers + 1 auxiliary transformer
 
#19
As suggested by Patrick, I would be willing to do the shipping of your transformers to you if you want me to do so and if it is finally cheaper to send from Germany.

Here are the rates from DHL:

DHL Paket International

Another reliable company is GLS. This company charges according to the size of the parcel and not its weight, i.e. this company might be ideal for shipping small and heavy parcels. Here are the rates for GLS:

The prices in the GLS Paket Shop depend on size not weight

I have no preference for a company, I'd ship using the company you want me to do so.

I have also checked for pmchoong whether there exists another cheaper shipping agency for Malaysia rather than DHL. There is none, unfortunately.
 
Last edited:
Status
Not open for further replies.
Top Bottom