I can reissue boards - does anybody here want them - or waiting for audio-store boards?
I would prefer one of yours.
Just added you to the sheet for one V3 main board kit, two psu kits, and two psu boards. Put you down in the extra diode column and added 8 to make syre you get the right amount since not purchase the diode/mosfet kit. Check it ou to make sure it looks good and get total price.
I can reissue boards - does anybody here want them - or waiting for audio-store boards?
Tea Bag, this is great news.
I get the sense that some of the people in Buzz's group buy (me amongst them) are essentially looking for an amp in a kit, and a main board is part of that. Going the breadboard or design-your-own route is more than we want to take on, and it was back in October that the store said that they will be building 5T boards which are "actually 3 or 5 boards to make 2 channels. Not hard to hook up though."
Do you have insight into the store's timeline? I for one would be interested in a reissue, particularly if it has a defined timeline and is simpler than the store proposal.
Its about demand, but it looks good so far. Just add your name to the sheet so i can give him some definite numbers. If i was building V2, teabags boards would be my choice, hands down.
On the road to Jersey. Will answer pm's this afternoon. See ya!
Sent a PM about Tea's main boards...standing by on the pay pal button!
Russellc
Guys,
I have no F5TC boards right now. But I re-opened the sign up sheet for them.
Use this link, and sign up on third round. I am not sure if your paying Buzz for the Power Supplies or not, or me. We will figure that out. But this will give me an idea how many to order.
https://docs.google.com/spreadsheet/ccc?key=0AnAnd3RI56NmdGk2aHZ0dkVGRnc1ZzdrWm9lYzgtOVE
Also more information can be gathered about the board here. This is the old GB thread. Although the post shows the 'white' boards. Questions about it can be asked there.
http://www.diyaudio.com/forums/grou...convertible-amplifier-boards.html#post3036340
I have no F5TC boards right now. But I re-opened the sign up sheet for them.
Use this link, and sign up on third round. I am not sure if your paying Buzz for the Power Supplies or not, or me. We will figure that out. But this will give me an idea how many to order.
https://docs.google.com/spreadsheet/ccc?key=0AnAnd3RI56NmdGk2aHZ0dkVGRnc1ZzdrWm9lYzgtOVE
Also more information can be gathered about the board here. This is the old GB thread. Although the post shows the 'white' boards. Questions about it can be asked there.
http://www.diyaudio.com/forums/grou...convertible-amplifier-boards.html#post3036340
The spread sheet doesn't seem to be editable.
Fixed that. Thanks for looking.
Its about demand, but it looks good so far. Just add your name to the sheet so i can give him some definite numbers. If i was building V2, teabags boards would be my choice, hands down.
On the road to Jersey. Will answer pm's this afternoon. See ya!
Why hands down? The spacing does not work with the pre-tapped chassis correct?
Why hands down? The spacing does not work with the pre-tapped chassis correct?
Somewhat true -
With the diodes mounted to chassis, it does not work - Buzz and I did not find it necessary other than with small heatsinks.
Otherwise, they are mounted 80mm top to bottom, and 40mm FET to FET
It will fit on the holes of the UMS specification according to PDF - but I dont have a chassis on hand to see if it will for sure fit, if someone has one on hand, I can give you a printout on paper that you can play with.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- F5T Premium kit GB