If your question was meant for me, then both will do, except that for solution B, R5 and R6 must also be changed to 150R.
Solution A is easier to implement. I have been using solution B myself, for no particular reasons.
Patrick
Solution A is easier to implement. I have been using solution B myself, for no particular reasons.
Patrick
I did and you threw me by the wayside...well frankly a little polishing around your rough manners will do you good.
I try to be SpongeBob every now and then.
F5 Mods Listing
I'm near completion of an F5, It's currently a stock build.
Does anybody have a listing or highlight of all the F5 mods/enhancements. I have a couple days free to complete it. But I'm getting swamped reading all all 800+ posts. Sorry for being lazy, just trying to save some time.
Thank You. 🙂
PS. Posting numbers will suffice.
I'm near completion of an F5, It's currently a stock build.
Does anybody have a listing or highlight of all the F5 mods/enhancements. I have a couple days free to complete it. But I'm getting swamped reading all all 800+ posts. Sorry for being lazy, just trying to save some time.
Thank You. 🙂
PS. Posting numbers will suffice.
Blues,
1) I was not referring to you.
2) I hate people using very single opportunity to advertise for their commercial activities. For me, it pollutes the thread.
3) I already indirectly advertised for you, in the interest of pointing people to a viable source.
Or should I have advertise for you by adding the link and the full details as well ?
You may have other opinions, I am allowed to have mine.
If you have a real first name, I'll address you every single time when I have a message for you.
Patrick
1) I was not referring to you.
2) I hate people using very single opportunity to advertise for their commercial activities. For me, it pollutes the thread.
3) I already indirectly advertised for you, in the interest of pointing people to a viable source.
Or should I have advertise for you by adding the link and the full details as well ?
You may have other opinions, I am allowed to have mine.
If you have a real first name, I'll address you every single time when I have a message for you.
Patrick
> Which at times you do as well.
Count how many post I advertise for anything, compared to the post I made with real technical contents.
And I don't have a link to those at my signature.
Actually, I don't really need any of those "commercial" activities, at least not financially.
It's more for the pride than anything.
Let's leave it at that.
Patrick
Count how many post I advertise for anything, compared to the post I made with real technical contents.
And I don't have a link to those at my signature.
Actually, I don't really need any of those "commercial" activities, at least not financially.
It's more for the pride than anything.
Let's leave it at that.
Patrick
Yeah whatever...I take it you at least once used my wormhole🙄 or you wouldn't know some details on my spreadsheet.
I know you don't care but I'll mention it anyway...I've also been developing the Curl Buffer (it's not the B1 by the way like Juma pointed out to you on the EB article).
I know you don't care but I'll mention it anyway...I've also been developing the Curl Buffer (it's not the B1 by the way like Juma pointed out to you on the EB article).
Okay, I made a mistake
For R1 to R8 I used 0.47ohms 3W instead of 1 ohm 3W, is that okay for filtering and power rating. It's kinda hard to desolder it now, the large capacitors are on the PCB.
http://www.diyaudio.com/forums/pass-labs/101993-pi-filter-clc-vs-crc-vs-c.html#post1212249
Thanks.
Never mind, was looking at an F1 PS schematic. Sorry....
For R1 to R8 I used 0.47ohms 3W instead of 1 ohm 3W, is that okay for filtering and power rating. It's kinda hard to desolder it now, the large capacitors are on the PCB.
http://www.diyaudio.com/forums/pass-labs/101993-pi-filter-clc-vs-crc-vs-c.html#post1212249
Thanks.
Never mind, was looking at an F1 PS schematic. Sorry....
Last edited:
> it's not the B1 by the way .....
The attached circuit was published in one of John Curl's threads on this forum in May 2006.
Patrick
The attached circuit was published in one of John Curl's threads on this forum in May 2006.
Patrick
Attachments
Last edited:
Blues' selling of matched fets on DIYAudio is a service in my opinion, and a hugely welcome one for many many people on this forum. He's hardly making a living out of it.
Most of the time it's generally considered better to be courteous - you talk of "polluting the thread". Well there's absolutely nothing more polluting than this kind of debate - take it to private messages if you want to continue - nobody else cares!
Is brown = wood?
If so, awesome!
So you'll have a metal plate between AC & DC?
Also, raised heatsinks - cool!
