Peter,
Do you have any F5 boards left? Price? Yeah, I know. I just bought the AJ boards from you a couple weeks ago. I've got the fever..again...and am thinking I'd like to do an F5 next. Used to design and build my own PCBs but it's a pain.
Dan.
Is there a dedicated F5 PS board for this project also? Or it the same PS as the AJ?
Do you have any F5 boards left? Price? Yeah, I know. I just bought the AJ boards from you a couple weeks ago. I've got the fever..again...and am thinking I'd like to do an F5 next. Used to design and build my own PCBs but it's a pain.
Dan.
Is there a dedicated F5 PS board for this project also? Or it the same PS as the AJ?
Yes, still have the boards and price the same as in a first post here: http://www.diyaudio.com/forums/group-buys/140306-f5-pcb-group-buy.html although due to falling USD$, it is in CAD funds now.
f5 with power supply board
f5 with power supply board do you stiil have
enough boards to build 2 channel
whats the the cost thanks
f5 with power supply board do you stiil have
enough boards to build 2 channel
whats the the cost thanks
Hello Peter,
Still some boards left ? I would need boards for two monoblocks ( amp + PSU). Would that still work out if one would splitt the PSU boards in two, one for each mono block ? And, if I managed to track everything down, would that be 38 CND, or is it more to ship to Germany ?
Thank you,
Stefan
Still some boards left ? I would need boards for two monoblocks ( amp + PSU). Would that still work out if one would splitt the PSU boards in two, one for each mono block ? And, if I managed to track everything down, would that be 38 CND, or is it more to ship to Germany ?
Thank you,
Stefan
Hi Peter,
same question like Stefan...2 channel F5 with appropriate PSU.
Cheers,
Wolfram
same question like Stefan...2 channel F5 with appropriate PSU.
Cheers,
Wolfram
Last edited:
MAybe not the best place to ask this - I am having issues with adjusting my 3rd F5 (first 2 came out perfect) - I start with 5K pots at zero in, coming up in equal steps trying to keep DC offset at zero. At about 0.2V bias I hit the end stop on the pot so I cannot increase the voltage any further and zero the DC offset at the same time. Did anyone have similar experience?
Maybe you can try additional resistors in series with the trimpots?
The PS boards are available now.
The PS boards are available now.
Last edited:
Hi Peter, sent you an email through the AudioSector website. I'll take a set of audio and power supply boards.
PS boards
I saw your post on no more PCB for PS left. Is that still the case or do you expect to get any in the near future ?
I saw your post on no more PCB for PS left. Is that still the case or do you expect to get any in the near future ?
Peter,
Would you be so kind and send me a quote for 2 F5 PS psb. (It is the one with 8 capacitors or the generic one ? )
Best regard and thank you in advance
Would you be so kind and send me a quote for 2 F5 PS psb. (It is the one with 8 capacitors or the generic one ? )
Best regard and thank you in advance
PS boards received
Thx Peter,
Received the PS boards last week in good order and changed the Mundorf Mlytic GO for the Jensen 4 poles in the F5. Only a few hours of listening now, very accurate, fast and natural. Definitely an improvement. No regrets.
J.
Thx Peter,
Received the PS boards last week in good order and changed the Mundorf Mlytic GO for the Jensen 4 poles in the F5. Only a few hours of listening now, very accurate, fast and natural. Definitely an improvement. No regrets.
J.
- Status
- Not open for further replies.