F3 and F4 Clone PCB Reissue group buy, also F5 PCBs

[kri_sch]

Hi Peter,
allready paid 2xF3 pcb s by paypal.
Thanks a lot!

 

[stroob]

Hi Peter

I wanted to add a F5 amp and F% PS card to my prior order.
Also adding another thanks for your effort on this.

Stroob

 

[Tea-Bag]

F1 boards

I just sent $60.00 by paypal for 2 F5 Amp boards and 2 F5 PS boards. I recently ordered F3 and F4 amp boards and PS.

Please consider doing the F1 and F2 also. I would like to have the complete set.😀

this out, all you transconductance freaks. An F1 group buy is in the works. To help you round out your firstwatt amp collection.

http://www.diyaudio.com/wiki/index.php?page=F1

 

[vonfilm]

I just put my name on the wili for the F1 boards.

If Peter could do an F2, then all the F amps would be available now.

 

[Peter Daniel]

Sure you can start Wiki; if there is a need for 50pcs or so , I can do that.

 

[Tea-Bag]

F2

I built a perfboard F2.
My recommendation for pcb power resistors would be to use Caddock MP's and heatsink mount them. It would tidy up the board size a bit, and sink more of that tremendous amount of heat off those 1 ohm resistors into a heatsink.

 

[vonfilm]

I don't know how to start a F2 wiki, but if someone else does, I will put my name in it.

 

[salesmonster]

I created a page...but I don't have time to populate it at this time...if someone else can set it up with a table for people to express interest it would be great!

F2 Page

 

[Valeriano]

Sure you can start Wiki; if there is a need for 50pcs or so , I can do that.

Will you maintain same spacing across fets a la F4?
If so, I'm interested 😱

Thanks
Vale

 

[Peter Daniel]

Of course it would be same spacing, so you can swap boards.

 

[Valeriano]

Of course it would be same spacing, so you can swap boards.

Very cool. thanks!

Vale

 

[vonfilm]

Peter,
Which of your PS boards will work for F2? I assume that I will need 1 PS board?

For DW8083' F1 Board GB, which of your PS boards is suitable? Would I need 1 or 2 PS boards for this?

 

[Peter Daniel]

Both F1 and F2 would be using F3 PS board. You need one board per amp, if you want to use more capacitance, use one per channel (to parallel caps)

 

[dcbingaman]

F3 and F5 PCB Boards

Peter, put me down for (1) F3 PS PCB and a pair of F3 amp boards, and (1) F5 PS PCB and a pair of F5 amp boards. I am thinking of bi-amping......

 

[scranton]

hi Peter

I sent my payment for the 2 PS and 2 F4 boards. Thanks
I used the wife's paypal account hence the different first name.
Jan

 

[Peter Daniel]

Re: F3 and F5 PCB Boards

Peter, put me down for (1) F3 PS PCB and a pair of F3 amp boards, and (1) F5 PS PCB and a pair of F5 amp boards. I am thinking of bi-amping......

F3/f4 payment info was posted here: http://www.diyaudio.com/forums/showthread.php?s=&postid= post1680605#post1680605

F5 orders: hhttp://www.diyaudio.com/forums/showthread.php?s=&postid= post1684087#post1684087

I sent my payment for the 2 PS and 2 F4 boards.

Payment received, thanks.

 

[ejfud]

Peter, any thing special I need to do to add another F3 PS to my order previous order?

 

[Peter Daniel]

Nothing really, just make another payment with a note that you are adding to your original order.

 

[Peter Daniel]

D. Gale, got your payment, but couldn't confirm through e-mail, as it keeps bouncing back.

 

[planet10]

Peter,

From the sounds of that last post, you are sending a confirmation email for each payment?

Mine was sent 9-dec-8

dave