hi!
does anyone have specs for this set of speakers?
Electrovoice Interface: 3 series II speakers
also my mate needs to know if he can replace the 8" with an eminence unit or similar ( i think its on its last legs)
he got them relatively cheap of ebay
cheers!🙂
does anyone have specs for this set of speakers?
Electrovoice Interface: 3 series II speakers
also my mate needs to know if he can replace the 8" with an eminence unit or similar ( i think its on its last legs)
he got them relatively cheap of ebay
cheers!🙂
thnx mate for posting this up for me. if anyone knows any info on these, please let me know.
cheers
Cory
cheers
Cory
Hi guys!
I remember I was talking to Cory about this on msn.
I don't have any information on the EV's, so I can't help out much there. But onto your other question - replacing the woofer - the crossover network is highly likely to need redesigning. For example, any zobel filters used will be incorrect for this driver as it has a different reactance, and also just like most other instrument speakers - they have a large positive rising slope starting from 1-2KHz, so that may need to be tamed as well if that is interferring with the crossover region. Or it may be that the crossover point needs to be completely different with the Eminence woofer, or it may be that certain filters need to be removed from the current crossover network, or maybe some need adding.
The box size and tuning may also be incorrect for those Eminence woofers too. Essentially, theres a handful of things which need to be considered. To make an informed decision, post schematics of your crossover and details of the box design and we'll go from there.
Adrian
I remember I was talking to Cory about this on msn.
I don't have any information on the EV's, so I can't help out much there. But onto your other question - replacing the woofer - the crossover network is highly likely to need redesigning. For example, any zobel filters used will be incorrect for this driver as it has a different reactance, and also just like most other instrument speakers - they have a large positive rising slope starting from 1-2KHz, so that may need to be tamed as well if that is interferring with the crossover region. Or it may be that the crossover point needs to be completely different with the Eminence woofer, or it may be that certain filters need to be removed from the current crossover network, or maybe some need adding.
The box size and tuning may also be incorrect for those Eminence woofers too. Essentially, theres a handful of things which need to be considered. To make an informed decision, post schematics of your crossover and details of the box design and we'll go from there.
Adrian
- Status
- Not open for further replies.