Gregm said:
Absolutely!
May be we can modify the wiki so that everyone can express his favourite choice...
Carlo
Hi,
have you thought about contacting Bent Audio? Although being located in Canada John Chapman might come up with an idea how to bring the TX102s for a reasonable price into our hands. I got mine from him, but had them collected in Canada.
Wilfried
have you thought about contacting Bent Audio? Although being located in Canada John Chapman might come up with an idea how to bring the TX102s for a reasonable price into our hands. I got mine from him, but had them collected in Canada.
Wilfried
Re: Pricing, and S&B vs. Sowter
Not with ABX test.
TL said that Sowter is in "good mid-fi" range, with which I can hardly agree.
As regards the transformer group buy, it would be best if someone from the group, whose credibility is thought by the rest to be unquestionable and judgment unbiased, could get test transformers from both manufacturers, compare them and then take a purchase decision for the entire group.
One good kit with Sowters:
http://mapage.noos.fr/dom.mafrand/kit.htm
my preamp:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=23086&highlight=
Regards
Milan
Gregm said:
Not with ABX test.
TL said that Sowter is in "good mid-fi" range, with which I can hardly agree.
As regards the transformer group buy, it would be best if someone from the group, whose credibility is thought by the rest to be unquestionable and judgment unbiased, could get test transformers from both manufacturers, compare them and then take a purchase decision for the entire group.
One good kit with Sowters:
http://mapage.noos.fr/dom.mafrand/kit.htm
my preamp:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=23086&highlight=
Regards
Milan
Re: Re: Pricing, and S&B vs. Sowter
Konnichiwa,
You may wish to put them side by side in a reasonably resolving system to make the comparison. It is quite illuminating. I can only comment on what it sounded to me, in my system.
Note, I am not saying the Sowters are bad, on the contrary, the upper Mid-Fi range contains a lot of excellent gear which merely falls short in some areas or a little overall, sort of like Stereophile Class A and Class B. Much of the Class B stuff is "upper Mid-Fi".
I am all for such tests....
Sayonara
Konnichiwa,
moamps said:
You may wish to put them side by side in a reasonably resolving system to make the comparison. It is quite illuminating. I can only comment on what it sounded to me, in my system.
Note, I am not saying the Sowters are bad, on the contrary, the upper Mid-Fi range contains a lot of excellent gear which merely falls short in some areas or a little overall, sort of like Stereophile Class A and Class B. Much of the Class B stuff is "upper Mid-Fi".
moamps said:
I am all for such tests....
Sayonara
That makes sense, although I wouldn't like to hijack jonclancy's wiki. Maybe Jon himself is game for this.
Otherwise, and since it seems probable that a euro GB for Django would ultimately end up with R Bastanis, maybe one of us living in Germany would be willing?
I could do the initial mailing myself, but as I'm based Athens, it would mean added transportation cost (I'm also not quite sure how to get the payment thingy right...).
Interesting. The kit costs 580 euro vs. the Django at ~667 euro+vat, etc. BTW, your own pre looks fantastic and labour intensive! I had considered using relays instead of switches -- but at 4euro/relay + cost of remote control, that option quickly put me out of budget.
Sorry for taking up server space
I mailed B Cherry on the Django subject.
Whatever reply there is, I'll relay to Jon.
I mailed B Cherry on the Django subject.
Whatever reply there is, I'll relay to Jon.
Hi All,
Firstly, feel free to alter the WIKI - that's the whole idea of it! 😀
I think some really good ideas on this GB are floating around - nice one.
As for me, I was wanting the TX102s as components as I have a prototype I want to develop over the next few months. I am interested in finding some high quality switchery for a decent price, but the Django kit might be too complete for me (if that makes any sense! 🙂 ).
However, the idea of using an EU-based distro does have lots of merit (and perhaps a parallel GB with Bent Audio for those over in the US) - it sorts out the VAT and Duty issue for a start.
Time to do a bit of surfing to follow up the links I've been sent (many thanks!!).
Jon 🙂
Firstly, feel free to alter the WIKI - that's the whole idea of it! 😀
I think some really good ideas on this GB are floating around - nice one.
As for me, I was wanting the TX102s as components as I have a prototype I want to develop over the next few months. I am interested in finding some high quality switchery for a decent price, but the Django kit might be too complete for me (if that makes any sense! 🙂 ).
However, the idea of using an EU-based distro does have lots of merit (and perhaps a parallel GB with Bent Audio for those over in the US) - it sorts out the VAT and Duty issue for a start.
Time to do a bit of surfing to follow up the links I've been sent (many thanks!!).
Jon 🙂
News..........
I may have some news coming from S & B soon.
As soon as I have it, so will you.
Jon 😎
I may have some news coming from S & B soon.
As soon as I have it, so will you.
Jon 😎
I have a Bent version of the S&B Tx102 MkII available for anyone interested. Never used. Can ship in same box it came in. I'm thinking $435 for a pair including shipping in US. E me if interested. They are not used because I opted to spring for the newer version when it came out, since I hadn't gone through the work of doing all the soldering on my original unit yet.
BTW, for those looking for a Shallco switch, you can buy them directly from Shallco. Go to their web site at www.shallco.com.
They will also do custom orders. For a volume control, you may want to ask for a lighter spring.
BTW, for those looking for a Shallco switch, you can buy them directly from Shallco. Go to their web site at www.shallco.com.
They will also do custom orders. For a volume control, you may want to ask for a lighter spring.
News.........
......not yet.
I am waiting for S & B to contact me when they have a plan.
Cheers
Jon
......not yet.
I am waiting for S & B to contact me when they have a plan.
Cheers
Jon
Brian Cheery mailed to say he's looking into the possibility of having JB send the TX102 directly rather than through HK... as per Kuei's idea.
This may be the plan JB was referring to in his communications with Jon.
Cheers
This may be the plan JB was referring to in his communications with Jon.
Cheers
News!!
....news from Brian Cherry.
Brians is offering a one-off deal which allows most of us to avoid duties, and reshipping expenses.
As Brian notes, this is a "one-time offer": neither Brian nor JB wish to upset dealers -- but hope to widen the scope of this product through those of us that accept.
....news from Brian Cherry.
Brians is offering a one-off deal which allows most of us to avoid duties, and reshipping expenses.
As Brian notes, this is a "one-time offer": neither Brian nor JB wish to upset dealers -- but hope to widen the scope of this product through those of us that accept.
- TX102: Twenty (20) pairs minimum
Very important: Cans shipped to INDIVIDUAL destinations, EITHER from the UK, OR HK!! So, this doesn't have to be a "EURO" buy any more...
Seiden switches also available, shipping from HK.
The deal is somewhat urgent (for obvious "dealer" reasons mentioned above)
[/list=1]
Jon's wiki had reached 17 pairs.
1) Are we all still interested?
2) Any more takers??? We'd need a minimum of 3 more.
Cheers,
Greg.
Pinging KevinTams
KevinTams also entered the Wiki (btw, no way to mail you so contact Jon or me directly).
This brings us to 18 pairs.
Two to go, hoping everyone else is still on the bandwagon.
Yoke, would you be interested in entering the Wiki? Either Jon or I will be mailing you directly. Jon has already gone into the trouble of creating a group-mail thingy, so we have to get ourselves organised here...
Cheers,
Greg
KevinTams also entered the Wiki (btw, no way to mail you so contact Jon or me directly).
This brings us to 18 pairs.
Two to go, hoping everyone else is still on the bandwagon.
Yoke, would you be interested in entering the Wiki? Either Jon or I will be mailing you directly. Jon has already gone into the trouble of creating a group-mail thingy, so we have to get ourselves organised here...
Cheers,
Greg
Greg/Jon, sounds good I am already on the wiki but I do need to know the costs, also any details on the Seiden switches would be appreciated.
S&B ping
Hi Greg, I've emailed Jon as you are not setup to be emailed from the forum. I've changed my preferences to be able to be emailed.
Definitely interested in the GP I just need to know what we are buying, just the transformers, or inc. the switch, or the kit? and obviously at what price.
thanks for the effort
Kevin
Hi Greg, I've emailed Jon as you are not setup to be emailed from the forum. I've changed my preferences to be able to be emailed.
Definitely interested in the GP I just need to know what we are buying, just the transformers, or inc. the switch, or the kit? and obviously at what price.
thanks for the effort
Kevin
- Status
- Not open for further replies.