ES9039PRO stereo

[Green77]

Hi all,

Anyone knows how to setup ess 9039pro chip as a stereo output?
I have looked at the datasheet but can’t find a register as in 9028/9038 to set chip as a stereo chip instead of 8-channel output.

BR// Daniel

 

[profiguy]

Are you wanting to run it in 2 ch simultaneous mode using all 8 ch? There is an application note floating around the web somewhere on this. Also, search for the Oppo UDP205 on here. There is a member who has extensive knowledge implementing this DAC for this purpose.

 

[bohrok2610]

Based on datasheet set SYSTEM CONFIG register CH78_SEL, CH56_SEL, CH34_SEL to use Input from ch1/2 interpolation path.

 

[Green77]

Aha, Thanks.
will have a look at the datasheet again.
BR// Daniel