• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

EnABL kit

EnABL Kit

Update to revise some info/

This kit includes the following:

1) type B nib holder
1) set, A-1 through A-5 Speedball pen nibs (5 nibs)
1) #99 Speedball pen nib
1 oz. Microscale MI-4 Gloss coat
1/2 oz. Floquil Poly Scale #404106 flat finish (stealth finish)

Mailed in a 6" x 9" bubble mailer. The liquids will be enclosed in their own zip-lock bag.

For the tidy sum of $28.
Others (outside US) $30.

Preferred payment method is by paypal. This will begin only after sufficient interest is expressed. Post your interest here or to me via the forum e-mail.

You will need to source the brush of your choice to install the Gloss Coat & containers to dilute the finish to suitable viscosity for application.

Subject to change.
 
Alex,

I will err on the safe side. I'd bet you could treat at least 5 pair of drivers.

This requires you to return unused paint to closed containers as soon as practical.

You will be diluting the paint for use.

My pm to you will include the address for forwarding paypal.