ECC85 - preamp ; EL95 - output with 5k to 4 ohms transformer. Output tube is pentode wired, ultralinear configuration. 250V PSU voltage. What will be the power output? I gues 2-2,5W.
Link:
http://www.r-type.org/exhib/aaa0406.htm
Better efficiency would be had using an OPT with higher impedance, ~8- to 10K.
Regards, KM
http://www.r-type.org/exhib/aaa0406.htm
Better efficiency would be had using an OPT with higher impedance, ~8- to 10K.
Regards, KM
- Status
- Not open for further replies.