Hi!
I would like to build a EL34 single ended amp. Anyone done that? A schematic would be apriciated
The thing is, I wanted to build a PP amp but i got 2 output transformers(for SE aplication), 2 ECC83 nad 4 EL34 for free. So i tought why not try to bo a SE EL34. I know it's a bit unusuall.
Robi
I would like to build a EL34 single ended amp. Anyone done that? A schematic would be apriciated
The thing is, I wanted to build a PP amp but i got 2 output transformers(for SE aplication), 2 ECC83 nad 4 EL34 for free. So i tought why not try to bo a SE EL34. I know it's a bit unusuall.
Robi
Here is another link
Here is a great construction article:
http://www.lundahl.se/claus_b_se.html
I have bought the LL1664/80mA transformers from the article for my 300B SE and they are sweet.
As for the other site, Aparently this site will be back up soon
Here is a great construction article:
http://www.lundahl.se/claus_b_se.html
I have bought the LL1664/80mA transformers from the article for my 300B SE and they are sweet.
As for the other site, Aparently this site will be back up soon
Thanks guys!
What do you think abaut this one?
http://www.hiendfi.com/modules.php?name=Sections&op=viewarticle&artid=90
Robi
What do you think abaut this one?
http://www.hiendfi.com/modules.php?name=Sections&op=viewarticle&artid=90
Robi
Schematic apears to have an error
Robi,
From what I know about SE amp the Plate of the EL34 should be hooked up to the transformer as shown. R6 and R7 should be conected to the battery (400V) and not the tube side of the transformer.
Robi Medvesek said:Thanks guys!
What do you think abaut this one?
http://www.hiendfi.com/modules.php?name=Sections&op=viewarticle&artid=90
Robi
Robi,
From what I know about SE amp the Plate of the EL34 should be hooked up to the transformer as shown. R6 and R7 should be conected to the battery (400V) and not the tube side of the transformer.
Miket,
R7 is conected correctly- for triode mode. If it would be direcli to suply then it would be pentode mode (I think).
Abaut R6 I don't know. In my opinion, when there is no signal it doesn't matter much because the resistance of the transformer is wery low. I'll have to ask Bojan abaut that. But I think it's correct.
Thanks,
Robi
R7 is conected correctly- for triode mode. If it would be direcli to suply then it would be pentode mode (I think).
Abaut R6 I don't know. In my opinion, when there is no signal it doesn't matter much because the resistance of the transformer is wery low. I'll have to ask Bojan abaut that. But I think it's correct.
Thanks,
Robi
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- EL34 SE amp schematics