The x-over was very primitive: cap and divider on thew tweeter plus relying on the woofer intrinsic HF rollof.
Regarding the box I will have to look for the measurements.
Regards
Charles
Regarding the box I will have to look for the measurements.
Regards
Charles
Regarding the crossover for a 1.3
It's crossed as the same point of the nuance with both the same drivers same order and the elusive time-allignment which is usual with dynaudio. Baffle stepcorrection is not applied.
My geuss would be that it's more or less the same crossover.
regarding the size of the 1.3 (SE). The dynaudiousa.com site give much ditails such as size and thickness of MDF used.
The only part I have figured out yet are the exct dimension of the port.
Ralph
It's crossed as the same point of the nuance with both the same drivers same order and the elusive time-allignment which is usual with dynaudio. Baffle stepcorrection is not applied.
My geuss would be that it's more or less the same crossover.
regarding the size of the 1.3 (SE). The dynaudiousa.com site give much ditails such as size and thickness of MDF used.
The only part I have figured out yet are the exct dimension of the port.
Ralph
- Status
- Not open for further replies.