Hello guys
I'm working on a vintage Echochord (live music echo effect) analog machine using a 1/4 inch recording tape in a loop. The AC input socket is design with only two wires (no ground). Since the original 120V cable is long gone (lost) I want to replace the input socket with modern two wires and a ground connect to the metal chassis.
With of the yellow or green wire should become the NEUTRAL and the HOT ?
Thank's for your tip, comment or help ... !
I'm working on a vintage Echochord (live music echo effect) analog machine using a 1/4 inch recording tape in a loop. The AC input socket is design with only two wires (no ground). Since the original 120V cable is long gone (lost) I want to replace the input socket with modern two wires and a ground connect to the metal chassis.
With of the yellow or green wire should become the NEUTRAL and the HOT ?
Thank's for your tip, comment or help ... !
> With of the yellow or green wire should become the NEUTRAL and the HOT ?
Does not matter. (Plugs in those days could be inserted either way.)
What matters is that your new 3rd wire (also green; do not get confused) MUST go to chassis SOLIDLY. Preferably in a way that it never needs to be disconnected for other repairs.
Does not matter. (Plugs in those days could be inserted either way.)
What matters is that your new 3rd wire (also green; do not get confused) MUST go to chassis SOLIDLY. Preferably in a way that it never needs to be disconnected for other repairs.
- Status
- Not open for further replies.