In need of a duel supply to power several TL074's at +12/0/-12
then need to power a cd4066 bi lateral switch as well as 10 lm3916's with led displays so 2-3 amps at 9v needed.
have schematic but it just dosn't look right?
Thinking of powering the cd4066 from the duel 12v supply but ??
18v transformer may be too much or ??
then need to power a cd4066 bi lateral switch as well as 10 lm3916's with led displays so 2-3 amps at 9v needed.
have schematic but it just dosn't look right?
Thinking of powering the cd4066 from the duel 12v supply but ??
18v transformer may be too much or ??
Attachments
Howdy!
The LM317 has the wrong pin out on you scheme - Pins: 1-in, 2-adj, 3-out.
The LM337 has the wrong pin out on you scheme - Pins: 1-adj, 2-in, 3-out.
The LM337 is still backwards.
You are shorting the adjust pins of both regulators to ground.
C11 and C12 are not needed if the LM7809 is within 4 inches of the main filter caps.
The LM317 has the wrong pin out on you scheme - Pins: 1-in, 2-adj, 3-out.
The LM337 has the wrong pin out on you scheme - Pins: 1-adj, 2-in, 3-out.
The LM337 is still backwards.
You are shorting the adjust pins of both regulators to ground.
C11 and C12 are not needed if the LM7809 is within 4 inches of the main filter caps.
corrected errors
hopefully corrected all my errors.
The 7.5+v side has more current draw than the 7.5-v side thus a smaller cap.
This should work if I am lucky
been working mostly off over the last 2 years on this Eq/ Spectrum analyzer
4 stereo inputs
5 bands per channel
10 lm3916 display drivers w/10 leds per
the bandpass filters are using a TILT filter design.
Been cleaning up schematics and pc boards.
Might just actually build this monster by summer?
hopefully corrected all my errors.
The 7.5+v side has more current draw than the 7.5-v side thus a smaller cap.
This should work if I am lucky
been working mostly off over the last 2 years on this Eq/ Spectrum analyzer
4 stereo inputs
5 bands per channel
10 lm3916 display drivers w/10 leds per
the bandpass filters are using a TILT filter design.
Been cleaning up schematics and pc boards.
Might just actually build this monster by summer?
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.