Hi,
one connects the secondaries in phase and the other out of phase.
The effect is that it's works or it blows up.
Get it right.
Use a light bulb in the primary feed until you are sure the circuit is working properly.
one connects the secondaries in phase and the other out of phase.
The effect is that it's works or it blows up.
Get it right.
Use a light bulb in the primary feed until you are sure the circuit is working properly.
2 windings on the same transformer will give you 2 sine waves, 50% of time giving current one way 50% of time current the opposite way for each winding.
there is 2 possibilities for placing 2 windings in series:
a connection made so both winding are pushing the same way at the same time and you get twice the voltage.
otherwise 2 windings pushing one against the other and you ge no voltage.
there is 2 possibilities for placing 2 windings in series:
a connection made so both winding are pushing the same way at the same time and you get twice the voltage.
otherwise 2 windings pushing one against the other and you ge no voltage.
- Status
- Not open for further replies.