Dual CS-606 Transformer

[RoyAaron]

I apologize for doing it this way but I just joined and cannot start a conversation. I need help with my Dual 606:
Might anyone know who the MANUFACTURER is and what the MANUFACTURER's part number is of the TRANSFORMER for the Dual 606?
Is there any chance you have it or know where to find it?
Thx,
-Roy

 

[as_audio]

Please explain what DUAL 606 is ..

 

[Mooly]

Dual 606 turntable I assume. Lets move it over on that basis.

 

[Mark Tillotson]

Dual CS-606 turntable to be precise. I found some online pics which showed the transformer being labelled "Dual 242279", though that doesn't seem to help - long gone I guess.

 

[Mooly]

Thanks, title edited.

 

[Kay Pirinha]

This is a small (3 VA) 18 Vac mains transformer. You might find a suitable replacement just anywhere.

Schematics

Best regards!

 

[RoyAaron]

Kay,
Thank you very much. But I now have a puzzle: you cite 18VAC, but I've seen other references showing a 22.5V output,
Is that for the motor or does the EDS 500 require 120V and the 22.5 (or 18V) feed another part of the unit?
-Roy

 

[Kay Pirinha]

Roy,

did you have a look at the schematics (which is an excerpt of the German service manual, btw) in my link? It says there's a mains transformer with a 17.5 Vac secondary, then a rectifier bridge and a filter capacitor that supply 22 Vdc to the motor control electronics. Nothing wrong with a 18 Vac transformer, I guess.

Best regards!

 

[RoyAaron]

Got it . . . Thank you very much!

 

[RS232]

Dual EDS500/501/502 are interchangeable and use all the same power supply.
This motor is a low voltage Direct drive unit used in many Dual turntables (Have a 604 with the same system)
Service manuals are available for free online if you can't find the 606 use the 604 they are the same
The schematic Kay Pirinha posted is the correct one