I am combining a 700AS2 and a 200AS2 in the same chassis. I want to use the the 700AS2`s 12v trigger function to bring it out of standby. The problem is that the 200AS2 is normally on, and can only be put in standby with a 5v signal.
Would it be possible to connect the standby led output from the 700AS2 to the standby input on the 200AS2? It requires 2.8V on a 20kohm load to trigger.
I have attached the datasheets for both.
Would it be possible to connect the standby led output from the 700AS2 to the standby input on the 200AS2? It requires 2.8V on a 20kohm load to trigger.
I have attached the datasheets for both.