Hi, i have an paradigm subwoofer, and i want to upgrade my system, i want to build my own subwoofer, wich driver recommends me? the Room size is 23x13 Feets.
i want to down to at least 20hz!. and i think that 12" will be ok. 🙂
i want to down to at least 20hz!. and i think that 12" will be ok. 🙂
Member
Joined 2002
samsagaz said:
What size is you'r Paradigm ? whats the model ? Is that sub loud enough for you or you want more now ?
Paradigm PDR-10 is the model
- Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in amplifier
- 120 watts RMS / 360 watts Peak
- 254-mm (10 in) carbon-fiber-reinforced composite cone, 38-mm (1-1/2 in) voice coil
- 27 Hz (DIN)*
- Cutoff Variable 50 Hz – 150 Hz
- weight 12.5 kg / 28 lb each
these are the specs of the subwoofer that i have right now.
I want to sell it and build another with more power and maybe that go a little low (20hz).
- Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in amplifier
- 120 watts RMS / 360 watts Peak
- 254-mm (10 in) carbon-fiber-reinforced composite cone, 38-mm (1-1/2 in) voice coil
- 27 Hz (DIN)*
- Cutoff Variable 50 Hz – 150 Hz
- weight 12.5 kg / 28 lb each
these are the specs of the subwoofer that i have right now.
I want to sell it and build another with more power and maybe that go a little low (20hz).
Member
Joined 2002
I know all the paradigm Sub's. I'm a paradigm speaker fan.
Well you need to tell us if you need more bass or are you just looking to build something. Ie starting off with a sub.
Well you need to tell us if you need more bass or are you just looking to build something. Ie starting off with a sub.
well i want to improve the quality of my sub, thats all, i want to go more deep, i think that the paradigm dont down to 20hz.
and more power will be great too 🙂
and more power will be great too 🙂
How long is a piece of string?
18 inches. 30mm one-way x-max to be exact.
http://www.tcsounds.com/tc5200.htm
18 inches. 30mm one-way x-max to be exact.
http://www.tcsounds.com/tc5200.htm
An externally hosted image should be here but it was not working when we last tested it.
damn thats amazing 😀 2000Watts RMS.. (6000 maxium peak) :S
its really too big for my room 😀
i need some small 🙂
i read that scan speak 23w/4557t00 is good...
its really too big for my room 😀
i need some small 🙂
i read that scan speak 23w/4557t00 is good...
Subwoofer
If you are looking for small enclosure size, look at the PEERLESS XLS or XXLS line:
http://www.tymphany.com/products_Peerless.html
ANother option would be an Ascendant audio driver, which would probalby cost less than a PEERLESS driver, not sure about shipping to SA:
http://www.ascendantaudio.com/assassin12specs.html
In either case you will need adaquet amplification and be able to build the enclosure.
If you are looking for small enclosure size, look at the PEERLESS XLS or XXLS line:
http://www.tymphany.com/products_Peerless.html
ANother option would be an Ascendant audio driver, which would probalby cost less than a PEERLESS driver, not sure about shipping to SA:
http://www.ascendantaudio.com/assassin12specs.html
In either case you will need adaquet amplification and be able to build the enclosure.
- Status
- Not open for further replies.